Pictures not uploading to online accountPictures added to the internal frame memory from an SD card do not upload to the kodak pulse account, ie they do not sync....
Antwort auf „Frame will not boot up; blank white screen.”I had this problem or part of it...the white screen. When it displays the white screen or gets frozen: unplug power, leave for at least 1h. Plug power and leave for 10 minutes or so. Press the Start button for 2 seconds only , frame should start. If it starts again with white screen : unplug, leave for 10 minutes. Plug back in and press AT THE SAME TIME both Check and Start buttons, this will reset the frame and you have to set it up again. If nothing works : with the frame plugged in but off press with a plastic stick through the hole located lower than the Check button, press for 2 seconds then wait. After that press AT THE SAME TIME both Check and Start buttons, this will reset the frame and you have to set it up again. Hope some of this will work for you. Regards, Adrian