Is there any reason you would want to replace them? I know there was a video showing how hot the ram gets but we haven’t seen many (if any) failures from this so far.
Please don’t do this to your 360… all you will do is damage it beyond repair bu trying to fix “broken solder joints” that aren’t even there… the issue lies in the flip chip itself, not the solder under the substrate.
This is no doubt the most BS solution out there. Ifixit essentially trying to scam people out of their money by selling them a bunch of things that won’t repair their ps3s. All this does is heat up the faulty flip chip enough that it will work for a short time.
Not a permanent fix for sure. This is still made under the assumption that solder is the issue, when its not.
Please don’t do this to your 360… all you will do is damage it beyond repair bu trying to fix “broken solder joints” that aren’t even there… the issue lies in the flip chip itself, not the solder under the substrate.
This is no doubt the most BS solution out there. Ifixit essentially trying to scam people out of their money by selling them a bunch of things that won’t repair their ps3s. All this does is heat up the faulty flip chip enough that it will work for a short time.
I am pretty sure its hdmi 2.1
What? Are you talking about the videos of people blowing water vapor into their consoles to make them look like they are smoking?
It wouldn’t help unless its pulling fresh air from somewhere. But 5 inches in the back should be perfectly fine.