Info
Reputation

stressmaster

@stressmaster

stressmaster

1.039	Reputation
210	Lösungen
0	Anleitungen
Mitglied seit 24.10.2021

Stimmen

1

0

Fragen

boot loop apple watch series 0 sport. on both charger & off 20. Mär 2022
I have a issue on a series 0 sport which is basically a series 1. I did a battery replacement from a totally dead battery....
ELEAF TC100W fire button search and teardown help 5. Jan 2022
I am looking for a replacement button for my tc100w as I love the unit but it is discontinued for awhile now so I can’t...
passenger rear won't bleed or brake 9. Nov 2021
2002 Malibu drum rear brakes. driver side bleeds fine. fronts bleed fine. only the back passenger will not bleed. pedal is...
Dremel4000 loud and excessive vibrations above 2500rpm 24. Okt 2021
Got it used and clogged with what I assume was drywall caulk. I took it apart and detailed it. but now after reassembly I...

Antworten

Antwort auf „Is there a way to repair rubber edges after backglass replacement?” 3. Apr 2022
It's a type of glue that also black. Most screens use it for waterproofing
Antwort auf „Why is my airbag sign light always flashing?” 3. Apr 2022
You have a sensor that's bad. Go to a autozone or similar to get them to scan it for free
Antwort auf „Is this salvageable at all? It fell and broke in half.” 3. Apr 2022
Yes. Get some plastic epoxy and glue it vavk together. Epoxy is permanent and will be stronger than original plastic
Antwort auf „I can make calls and rcv text, but can't rcv calls -RESOLVED” 3. Apr 2022
Check your do not disturb setting is off
Antwort auf „Trimmer stopped suddenly while using.” 3. Apr 2022
Have you been oiling the bushings at the bottom of the rod? If not it may have siezed or become to dry or needs to be replaced
Antwort auf „LED screen started with one line and now has 6 lines” 3. Apr 2022
Check the ribbion is fully seated on both sides. Sometimes you may need to replace it.
Antwort auf „How do I reattach the handle?” 3. Apr 2022
Can you post a picture
Antwort auf „Turns on by itself when I open the door” 3. Apr 2022
Sounds like you need to replace one or both door close switches
Antwort auf „Why does my 2007 ford edge overheats when AC is on” 3. Apr 2022
Sounds like a belt slipping issue. The ac takes more torque to spin. Change belt and check that the idler pully spins freely. Also check the fan blades are clear & spun easily
Antwort auf „Tries to power on but the screen doesn't come on and it restarts repea” 3. Apr 2022
Hold power button down for 30 seconds and lmk if that helps

Seite 1 von 21

Reputation im Laufe der Zeit

Reputationsverlauf

Ereignis	Anzahl	Summe
Antwort wurde akzeptiert	21	630
Beitrag wurde positiv bewertet	34	408

Auszeichnungen

110(1)

Kommentator(1)

Wachsamkeit(1)

Puzzleteil(1)

Pfadfinder(1)

110(1)

Kommentator(1)

Wachsamkeit(1)

Puzzleteil(1)

Pfadfinder(1)

110(1)

Kommentator(1)

Wachsamkeit(1)

Puzzleteil(1)

Pfadfinder(1)