complete and comprehensive guide, Easy to follow.

Only two small points of critique,

On step 5 It says "Use a combination of the opening tool and your fingers to pry open the top panel of the drone along the seams."

This seemed almost impossible to do withcout damaging the plastic.

I then found a youtube video that showcased that you can unclip a few lips inside the drone, this made the cover come off much easyer.

The video also showed an easyer whay to put the pint removed in step 14 back in.

Apart form these two tips, the guide is practically perfect

The video is by: J T

https://youtu.be/PD678snE44w