Diese Person hat ihr Profil noch nicht ausgefüllt.
Fragen
I’ve noticed that my wireless charging setup is not very efficient. Even when I position my device correctly, it doesn’t...
Mehr erfahrenForum
It looks like the Pro Controller issue might be linked to internal connections, like the ribbon cables or potential shorts on the charging chip. A common fix involves checking those connections carefully to ensure they're intact. Sometimes, power issues are more about small misalignments or contact problems inside the controller.
Mehr erfahrenUpgrading your G-RAID HDD depends on drive compatibility and RAID configuration. Many enclosures have size limits, so check your model’s specs before swapping in larger drives. If using RAID 1, upgrading one drive won’t increase storage—it will mirror the smaller capacity. Back up your data and confirm support for larger drives before proceeding.
Mehr erfahrenIt’s always frustrating when Bluetooth devices don’t work as expected, especially when you’re unsure whether the issue lies in the installation or outdated drivers. Before diving into troubleshooting, it’s helpful to understand how operating systems manage Bluetooth connectivity and device updates. Windows, macOS, and even Linux handle these processes differently, with built-in tools to check driver status and update compatibility.
Mehr erfahrenThat does sound frustrating, especially after getting a replacement and still seeing the same issue. I’ve always heard that a freezer should ideally stay at or below 0°F for food safety, with minimal fluctuations. While some variation is normal, cycling up to 12-20°F seems excessive, especially for ice cream to stay firm.
Mehr erfahrenHad the same issue before—turned out my charging port was full of dust and lint. I used a toothpick to carefully clean it out (gently, so I didn’t damage the pins), and suddenly my phone was charging normally again. If you’ve had your phone in your pocket a lot, dirt can build up and block the connection.
Mehr erfahrenYeah, it’s possible, but not easy. The biggest challenge is separating the layers (especially the polarizer and diffuser sheets) without creasing or contaminating them. If you want to swap backlight sheets from cracked screens to fix vinegar syndrome ones, it’s doable, but expect a delicate, tedious process. You’ll need a razor blade or plastic tool to carefully pry it open, and strong double-sided tape or a UV adhesive to reseal it.
Mehr erfahrenCheck if the tab has perforations or a pre-fold area where it can be adjusted. If it’s still too long, some people carefully trim excess plastic (not the contacts!) for a better fit.
Mehr erfahrenPixelNero009
@pixelnero009
67
Reputation
7
Lösungen
0
Anleitungen
Mitglied seit 02/12/25