Matt Weatherly

I have an original Playstation SCPH-1001. I have tried Final Fantasy VIII and Twsited Metal III. About the time it gets to...

I had this same issue and i fixed it. But it is a rubber belt that needs to be cleaned. Use a paperclip to Manually reject. You will see a small pulley and a bigger one in the middle gap of the cd tray. Use tweeters to take the belt out. Use a damp paper towel to clean any dust/dirt from the small rubber belt. Then carefully put the rubber belt back on. Turn the system on... This has fixed 2 system for me.

I have found that there could be a few possible issues. 1) Bad spindle motor - there are several sites that sell this motor. 2) the black and white cable is unplugged or not connected 100% 3) the drive assembly could be malfunctioning the last possibility is the IC on the system board fairly rare but possible. good luck Matt

Used this on both the Left and Right Joycon, the Left Joycon has an extra ribbon that goes over the analog stick. So yes if you dont have to take off the 2 ribbons that connect the 2 halves don’t. Great job!