krisfuqua

Greetings! My team is tackling screen refurbishing and we noticed that there seem to be after market LCDs that do not...

Is there a way to protect the phone from that happening or does it do so automatically?

I am currently doing some resets on a lot of computers. We are re-imaging them then testing a few and to verify the...

Greetings! So I have had a handful of iphone's that have had this particular problem. Phone has been restored and boots to...

Seriously my crew tears destroys 10 of these a day. I want one made Adamantium but real life hasn't caught up to the...

Anyone know where I can get the mother board schematics for a Carbon x1 LMQ-1 12298? A website with any and all laptop MB...

I have many Sprint Android devices I have to carrier reset to remove old owners phone number and email in settings for...

As subject says, replaced lower doc and scanner no longer works. Tried new doc same issue. Any suggestion? Do not have...

Got a LG D850 a customer brought in that will not power on. Screen works and shows 100% battery. Trying to find a way to...

So I've seen this problem on a few forums. The phone works fine unless you make a call. When you do, the mic and the...

Really hard to say. Try holding down the home button and power button together for 30 seconds while it is not plugged in and see if the apple icon appears. If it does see if it boots normally. If it does not then you may have one of any number of issues from a software glitch during your update or a hardware failure (which is why it is getting warm.).

Hey Ronald, sounds like the laser has gone bad. There are 2 lenses on the laser module inside the CD drive, one for each type of CD. One can go bad while the other continues to function. You can replace this at a lot of repair shops or try it yourself, there are plenty of videos on it. You will need to take it apart and verify the laser model before ordering the replacement, I think they changed the exact model from time to time and they are not universally compatible.

Can you attach picture? All of the iPhone 5 models look the same and the below link should function for them; iPhone 5 Akku tauschen If it doesn't match this you could have a counterfeit phone.

Without the exact model I can't be specific but If the component is cracked off of the board the easiest way would be to look up the board for your model and replace the whole thing. It is fairly strait forward swap. Fixing the board itself would require some soldering skill and if the damage is extensive there may not be a way to effectively repair it.

That would be the best guess. It is possible that there is another board failure preventing the battery from receiving the charge but a bad batter is the most likely failure here.

Hard to say. as it could be any number of things. (1) Bad replacement LCD and or cable (2) LCD cable not seated correctly (happens a lot with this type of connection). (3) Bad main board. (4) Corrupt software (unlikely).

The power button is defiantly replaceable. I recommend doing a search for a local shop or mail in service.

AS Aiden Baker suggested, replace the battery. The problem you describe points to a battery failure. That and if it is swollen in the way you described there is a high chance it is damaged. This could be from the liquid or a crazy coincidence. If there replacement batter results in the same problem and you have already swapped out the charging port then it means a competent has shorted out on the board. It "could" still be fixed but you will need a shop with micro soldering equipment and schematic knowledge to test and replace.

There appear to be some small differences in shape and ID tags on the flex cables. Good new is to be safe you can find the Neo versions on ebay and other sources; http://www.ebay.com/itm/like/18204441381...

Sounds like a bad part replacement. If there is a warranty where you got the repair done, you need to go back and speak with them.