Reputation im Laufe der Zeit
Reputationsverlauf
| Ereignis | Anzahl | Summe |
|---|---|---|
| Ein Administrator hat deine Anleitung genehmigt | 3 | 372 |
| Jemandem gefällt deine Anleitung | 3 | 30 |
| Jemand hat deine Anleitung absolviert | 1 | 27 |
| Beitrag wurde positiv bewertet | 1 | 12 |
Hilfe
Forest
@forest_m
Forest
| 442 | Reputation |
| 1 | Lösung |
| 3 | Anleitungen |
| Mitglied seit 17.11.2016 | |
Open the brown thingie, slide the cable back in and close the brown thingie.
The cable should be inserted fully in
About photo 3: I'm wondering - is there a commonly used name for this type of connectors?
Yes, it is possible. Switch the toy OFF. You need a long phillips screwdriver to reach all the 16 screws on the bottom. Disconnect the power wire when you lift the plastic - see photo in Step 4. Then carefully unscrew the little green board (see Step 5, on the right) and you’ll be able to remove and clean the buttons. Placing the buttons back might be a bit tricky. Good luck!
That was actually the reason why I took it apart - my kid was drooling on the piano and half of the keys stopped working :)
Just pop the brown part “upwards” carefully with your fingernails
Nice catch :)
I’ve updated the description, thanks!