| 14.588 | Reputation |
| 4 | Lösungen |
| 77 | Anleitungen |
| Mitglied seit 18.12.2019 | |
We're just some folks with repair on our minds...
The European side of iFixit: Same same only different ;)
The content team at iFixit Europe. This is the highly...
I’m Adriana–a working student in the iFixit Europe content team since late 2019. Around here, I’m mostly taking devices apart and writing guides for you and everyone who wants to enjoy the repair revolution.
I graduated in 2020 from HdM Stuttgart with a bachelor’s degree in Mediapublishing. Currently I’m doing my master in Crossmedia Publishing & Management.
In my spare time, I love to go hiking, playing table tennis, doing DIY-Projects and riding my bike.
| Ereignis | Anzahl | Summe |
|---|---|---|
| Ein Administrator hat deine Anleitung genehmigt | 77 | 9504 |
| Jemand hat deine Anleitung absolviert | 168 | 4398 |
| Administrator genehmigte dein Wiki | 9 | 450 |
| Jemandem gefällt deine Anleitung | 20 | 144 |
| Beitrag mit Link zu deiner Anleitung wurde positiv bewertet | 7 | 64 |
| Beitrag wurde positiv bewertet | 2 | 24 |
| Kategorisierung akzeptiert | 3 | 3 |
Hi @Gertjan, we’re happy to hear that your smartphone is up and running again. Thanks for your feedback!
Hi @Cameei, we think it is the ThumbPointer stick with serial number RKJXV. Here is the matching data sheet: https://www.mouser.de/datasheet/2/15/RKJ.... Have fun with the replacement!
Hi Allan, It's difficult to remotely identify what's wrong with your A50. Let us know what the reason is if you can figure it out.
Hi Ruari, take a look at our store. You will find a range of different adhesives there. For the attachment of your battery I recommend these stretch battery adhesive. For the reassembly you can use this tape or another thin double-sided tape. For removing any remaining adhesive you can use this adhesive remover or remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or tweezers. Good luck and have fun with your repair!
Yes, still 3 GB RAM.
Hi, these guide describe how to replace the screen while leaving the original frame and motherboard in place. Good luck with the repair!
Hi, as far as we know, there is no official solution for this issue yet. We hope Samsung fixes this issue or provides a way for 3rd party repair technicians to calibrate new sensors. If you want to know more about this topic you can watch this video from Hugh Jeffreys: https://www.youtube.com/watch?v=zGLQ9ZRn....
If you find any other news about this topic share it with us. :)
Hi @nicole, in this guide the iOpener is used, but a hair dryer or heat gun could also be used.
Hi Ayush, no, your Nord is fine. The way the smartphone is built, you can't damage anything with the opening tool. I'll add an interesting article for you here, have a look at it: Why You Can’t Really Damage Your Microphone Port with a SIM Eject Tool.
Hi JJB, it’s very difficult to seal your watch waterproof after a repair but I can recommend this glue. I hope your repair works! Feel free to share your experience with us when you have finished it.
Seite 1 von 2
Weiter