The LCD screen is black after pushing the power button.
Plug the power supply into a working power outlet and confirm that adapter is properly plugged into the device.
Test the device by plugging the power supply into multiple power outlets to confirm the outlet is working.
You may need to replace the auxiliary port. Please continue to link provided for
You may need to replace the display. Please continue to the link provided for further instruction.
You may need to replace the power button. Follow the link for further instructions.
When iPod/iPhone is docked, radio speaker has no sound.
Locate the mute button on the device and toggle the switch to see if device will
Locate the volume button on the iPod/iPhone and make sure it is turned up all t
the way. Locate the volume button on the clock radio and make sure it is not on
the lowest setting.
If your device still has no sound, check to confirm that the iPod/iPhone is docked and that it is on and playing music.
You may need to change the speaker on the NS-CLIP02
When the iPod/iPhone is docked but the charge icon does not appear
You may have to replace the 30 pin connector. Follow the link for further instruction.
Antwort auf „Why won't my television power on”You can always reset your tv for such kind of problems. However, most probably that won’t work for your case as you stated that the LED blinked like 6 times. The problem is I couldn’t find many resources on the internet for Hisense TV error codes. I found one where it is written that the LED blinking 6 times means malfunctioning mainboard or inverter. And for the good case, only malfunctioning LED. You can check the url I found if you want more information. https://protroubleshooting.com/hisense-tv-troubleshooting/
Antwort auf „harley davidson security system pin problem.”Hello @jeaneallen Please let me know which browser did you use? Anyway, i found troubleshooting here you may check this. https://protroubleshooting.com/harley-davidson-security-system-troubleshooting/ I hope it might help you.
Antwort auf „How do I fix my laptop that got wet”Occasionally it may take longer to dry because of the environment. Anyway, try the following steps as soon as you can. https://www.wikihow.com/Save-a-Laptop-from-Liquid-Damage Hope this might help you and waiting to hear good news from you.
Antwort auf „Why won’t the screen light up?”Methord-1; Reset the System Management Controller to Fix- 1. Shut down Mac and connect it to your MagSafe adapter and a wall outlet as usual. 2. Hold down the Shift+Control+Option+Power button for a few seconds at the same time. 3. Release, then boot the Mac as usual Method-2: Try a Keypress Sequence to Fix- 1. Press the Power / OFF button once – this will bring up the dialog box which you can’t see 2. Press the “S” button – this is the shortcut to sleep the Mac 3. Hold down the Power button until a hard shut down is forced 4. Wait about 15 seconds, then hit the Power button again to turn it back on. Hope this might help you.
Antwort auf „samsung tv ghosting double image”Below are some tips you may try - (1) Try connecting the TV to a different source (e.g. change HDMI ports.) to identify whether the issue is with the TV or the source. (2) Power cycle both the TV and the source. Make sure to unplug the TV and the source from the power point, wait at least one minute before plugging and turning them back On. (3) Check to see if your TV has the latest version of the firmware. If not, update to the latest firmware. (4) Reset the Picture Settings. Note: The best diagnosis would be from a tech. You can call 800-SAMSUNG and have someone sent to check out what the issue would be. Hope you do not need to change the T-con board.
Antwort auf „New laptop doesn't recognize touch pad and cpu usage is on 100”(1) Update your touchpad driver then check after restarting your device. (2) Check your start-up program from Task Manager. Hope those process will help you.
Antwort auf „How to fix "No bootable device" after replacing hard drive?”You need to install an OS. You'll need bootable media (either a USB or a disk), and inset that to start. You may have to amend your boot priority in the BIOS to match whichever method of media you're using to install (ie if booting from a disk, select the disk drive as boot priority #1)
Antwort auf „How can I fix horizontal and vertical lines on my tv”Yes, this is fixable. You should need to change your T-Con Boards.
Antwort auf „laptop not booting , when I go to booting through USB. my pc shutdown”I think your pen drive is not bootable properly. After getting a proper bootable USB. Do the following step while powering your device, 1. Access System Setup by pressing <F2> key
Antwort auf „phone heating and battery draining”I searched a little bit online. Try the following steps to cool your phone down again, 1. Remove the phone’s case 2. Switch on airplane mode to disable all connectivity 3. Move it from direct sunlight 4. Direct a fan at your phone (but don’t put it in a fridge, freezer, or cooler) 5. Reduce the display brightness Once you’ve done this, try the following to avoid further overheats: 1. Use Battery Saver mode 2. Clean up your phone to remove junk files 3. Reduce Wi-Fi, Bluetooth, and GPS use unless needed Not only should your phone stop overheating again, but the battery should last longer! Beyond overheating, there are plenty of apps you can use to check if your Android is functioning properly.
Seite 1 von 5
Reputation im Laufe der Zeit
|Beitrag wurde positiv bewertet||15||180|
|Antwort wurde akzeptiert||4||120|
|Hat eine Antwort akzeptiert||1||10|
|Beitrag wurde negativ bewertet||1||-2|
|Dein Beitrag wurde aufgrund von Meldungen gelöscht||1||-100|