Loukas

If i let my note 3 on the table from a small height the cell phone restart itself and the percentage drops. I already change ...

My laptop uses an AMD A6 34-30 MX processor and AMD graphic card. If i press the volume down key wich is located on F9 and vo...

I opened the camera application to take photo. The camera seemed that it had split in half and the right part was flashing gr...

I would like to ask if i could change my gpu with a better one by staying at the same series as my current one.

I have the laptop for a six month period after a few time i start up the laptop i have a notification that says the usb is no...

I cannot navigate through trackpad and to make it work for an amount of time i had to press it really hard. Do you know a way...

For the cell phone you are referring, the fixing cost shouldn't be high. The spare parts are not expensive.

Windows 7 pro can handle 192GB of ram if it's the 64bit version. The 32 GB version can only handle 4GB of ram.

The ps3 is dual voltage but you should confirm that by checking your power supply. First confirm that on the PS3 label is written 120 - 240V.

Why does my PS3 turn off after the lights flash?

Follow this guide and you will be fine... Kindle Fire HD 8.9" Display Assembly Replacement

Check the voltage of the power supply with a polymeter on the motherboard. There is a chance the problem is on the power supply.

If you dont want to pay someone to change it like NOKIA customer service you can buy a screen on the internet and a digitizer if your digitizer is broken. The price on a Lumia 520 screen is about 50 usd from some websites on the internet.

Some small adjustment can be done by opening the device and try to move it a bit!!! BUT, because the jack is connected to the board via copper by trying to fix it over and over again till it finally get its possition you can cut the jack input. So if you want to try it be carefull and if it can't reach its position dont force it to.

You can try using contact clener spray in to the switch after you take it off your door and if it still does not work then you can order from the internet and change it by yourself. Is not a difficult task to do.

Well the tin foil is a conductor but is not going to fix your problem.Also it's not safe to use tin foil. I would recomend you to order a spare part over the internet and change it. It's easier and safer.