Repariere deine Sachen Community Store

Sostituzione Schermo Google Pixel 7 Pro

Zurück zur Anleitung
Englisch
Italienisch

Schritt 1 übersetzen

Schritt 1
Google Pixel 7 Pro Screen Replacement, Separate the screen: Schritt 0, Bild 1 von 3 Google Pixel 7 Pro Screen Replacement, Separate the screen: Schritt 0, Bild 2 von 3 Google Pixel 7 Pro Screen Replacement, Separate the screen: Schritt 0, Bild 3 von 3
Separate the screen

  • Remove the screen.

  • During reassembly:

  • If you replaced your screen, check the front-facing camera hole and the sensor cutout on your replacement screen, and remove any remaining liners.

  • Check the frame for deformed grounding springs that stick straight up. These spring contacts should rise at a shallow angle. Use your finger to gently bend any deformed springs downward.

  • Remember to reinstall the display cable bracket.

  • This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, power off your phone and disconnect the screen.

  • Follow this guide if you're using custom-cut adhesives for your device. Follow this guide in case you're using a pre-cut adhesive card.

  • If you're installing a new screen, follow this guide to calibrate the fingerprint sensor.

Separa lo schermo

Rimuovi lo schermo.

Durante il riassemblaggio:

Se hai sostituito lo schermo, controlla il foro della fotocamera frontale e l'incavo del sensore sul tuo nuovo schermo di ricambio e rimuovi eventuali pellicole residue.

Ricorda di reinstallare la staffa del cavo del display.

Questo è un buon momento per testare il tuo telefono prima di sigillarlo. Collega temporaneamente lo schermo, accendi il telefono e assicurati che funzioni come previsto. Prima di continuare con il rimontaggio, spegni il telefono e scollega lo schermo.

Segui questa guida se stai usando dell'adesivo fatto su misura.

Segui questa guida se stai usando una carta adesiva pre tagliata.

Se stai installando uno schermo nuovo, segui questa guida per calibrare il sensore di impronte digitali.

[title] Separate the screen
[* black] Remove the screen.
[* icon_reminder] During reassembly:
[* red] If you replaced your screen, check the front-facing camera hole and the sensor cutout on your replacement screen, and remove any remaining liners.
+ [* green] ***Check the frame for deformed grounding springs that stick straight up.*** These spring contacts should rise at a shallow angle. Use your finger to gently bend any deformed springs downward.
[* icon_note] ***Remember to reinstall the display cable bracket.***
- [* black] This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, ***power off your phone and disconnect the screen***.
- [* black] [guide|156204|Follow this guide|new_window=true] if you're using custom-cut adhesives for your device.
- [* black] [guide|113604|Follow this guide|new_window=true] in case you're using a pre-cut adhesive card.
+ [* icon_note] This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, ***power off your phone and disconnect the screen***.
+ [* black] [guide|156204|Follow this guide|new_window=true] if you're using custom-cut adhesives for your device. [guide|113604|Follow this guide|new_window=true] in case you're using a pre-cut adhesive card.
[* black] If you're installing a new screen, follow [guide|166753|this guide|new_window=true] to calibrate the fingerprint sensor.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.