Repariere deine Sachen Community Store

谷歌 Pixel 7 Pro 更换屏幕

Zurück zur Anleitung
Englisch
Chinesisch

Schritt 1 übersetzen

Schritt 1
Google Pixel 7 Pro Screen Replacement, Separate the screen: Schritt 0, Bild 1 von 3 Google Pixel 7 Pro Screen Replacement, Separate the screen: Schritt 0, Bild 2 von 3 Google Pixel 7 Pro Screen Replacement, Separate the screen: Schritt 0, Bild 3 von 3
Separate the screen

  • Remove the screen.

  • During reassembly:

  • If you replaced your screen, check the front-facing camera hole and the sensor cutout on your replacement screen, and remove any remaining liners.

  • Check the frame for deformed grounding springs that stick straight up. These spring contacts should rise at a shallow angle. Use your finger to gently bend any deformed springs downward.

  • Remember to reinstall the display cable bracket.

  • This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, power off your phone and disconnect the screen.

  • Follow this guide if you're using custom-cut adhesives for your device. Follow this guide in case you're using a pre-cut adhesive card.

  • If you're installing a new screen, follow this guide to calibrate the fingerprint sensor.

分离屏幕

将屏幕与手机组件分离。

重新装配时，用异丙醇（>90%）清洗相关区域后，在需要的地方涂上新的粘合剂。

Follow this guide 如果您的设备使用的是定制切割粘合剂。

Follow this guide 如果您使用的是预切胶卡。

如果更换屏幕的显示电缆是用胶带固定的，请在安装前取下胶带。

确保移除更换屏幕上的所有粘合衬垫。***检查自拍摄像头凹槽，确保已去除此处的衬垫。

在重新组装后的启动过程中，屏幕将经历一个校准序列。在此过程中，请勿触摸屏幕，否则可能导致触摸校准不当并产生触摸问题。

[title] Separate the screen
[* black] Remove the screen.
[* icon_reminder] During reassembly:
[* red] If you replaced your screen, check the front-facing camera hole and the sensor cutout on your replacement screen, and remove any remaining liners.
+ [* green] ***Check the frame for deformed grounding springs that stick straight up.*** These spring contacts should rise at a shallow angle. Use your finger to gently bend any deformed springs downward.
[* icon_note] ***Remember to reinstall the display cable bracket.***
- [* black] This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, ***power off your phone and disconnect the screen***.
- [* black] [guide|156204|Follow this guide|new_window=true] if you're using custom-cut adhesives for your device.
- [* black] [guide|113604|Follow this guide|new_window=true] in case you're using a pre-cut adhesive card.
+ [* icon_note] This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, ***power off your phone and disconnect the screen***.
+ [* black] [guide|156204|Follow this guide|new_window=true] if you're using custom-cut adhesives for your device. [guide|113604|Follow this guide|new_window=true] in case you're using a pre-cut adhesive card.
[* black] If you're installing a new screen, follow [guide|166753|this guide|new_window=true] to calibrate the fingerprint sensor.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.