Repariere deine Sachen Community Store

Sostituzione scheda connettori Teenage Engineering OP-1 DS

Zurück zur Anleitung
Englisch
Italienisch
Nächster Schritt

Schritt 1 übersetzen

Schritt 1
Teenage Engineering OP-1 Connector Board Replacement, Remove Back Panel: Schritt 0, Bild 1 von 3 Teenage Engineering OP-1 Connector Board Replacement, Remove Back Panel: Schritt 0, Bild 2 von 3 Teenage Engineering OP-1 Connector Board Replacement, Remove Back Panel: Schritt 0, Bild 3 von 3
Remove Back Panel

  • Open the back panel by using a Jimmy on the side of the panel. Be careful not to damage the OP-1 coating.

  • Lift the back panel and remove it. The Connector Board is revealed.

Rimozione pannello posteriore

Apri il pannello posteriore utilizzando un Jimmy da un lato del pannello stesso. Stai attento a non danneggiare il rivestimento dell'OP-1.

Solleva il pannello posteriore e rimuovilo. A questo punto la scheda connettori sarà visibile.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.