Repariere deine Sachen Community Store

Sostituzione scheda connettori Teenage Engineering OP-1 DS

Zurück zur Anleitung
Englisch
Italienisch
Schritt 2
Teenage Engineering OP-1 Connector Board Replacement, Remove Connector Board: Schritt 0, Bild 1 von 3 Teenage Engineering OP-1 Connector Board Replacement, Remove Connector Board: Schritt 0, Bild 2 von 3 Teenage Engineering OP-1 Connector Board Replacement, Remove Connector Board: Schritt 0, Bild 3 von 3
Remove Connector Board

  • Disconnect the flex connector by lifting it up with a spudger.

  • Remove the three Phillips screws. Do not lose the washer at the bottom screw.

  • Take out the connector board.

  • Make sure to keep the black rubber pad underneath the board.

Rimozione scheda connettori

Scollega il connettore flessibile spingendolo verso l'alto con uno spudger.

Rimuovi le tre viti a croce Phillips. Non perdere la rondella.

Tira via la scheda connettori.

Accertati di lasciare al suo posto, sotto la scheda, la parte in plastica nera.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.