Repariere deine Sachen Community Store

iPhone 5s 电池更换

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 3 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Chinesisch
Vorheriger Schritt

Schritt 6 übersetzen

Schritt 6
How to replace the battery in your iPhone 5s: Schritt 0, Bild 1 von 3 How to replace the battery in your iPhone 5s: Schritt 0, Bild 2 von 3 How to replace the battery in your iPhone 5s: Schritt 0, Bild 3 von 3

  • Pull the battery out of the rear case.

  • If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

将电池从后盖拉出。

如果你购买的替换电池在插口排线上有个塑料保护套，在安装前先从这个排线上拔下来。

如果手机中残留有酒精溶液，请在安装新电池之前小心地将其擦掉或让它自然风干。

在固定更换电池之前，暂时将电池连接器重新连接到逻辑板插座。 这可确保电池在其凹槽中正确对齐。

粘上电池，断开连接，然后继续重新组装您的设备。

如果你的电池并没有预先贴好粘合剂，，请参考这份指南来替换您电池的胶带。

重新组装完成后，执行一下手机重启。这样可以避免一些问题，并方便故障检修。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.