Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

Follow this guide to replace or remove the battery in your Lenovo YOGA 730-15IKB. The battery powers the computer when the charger is not plugged in. It is a wise idea to unplug the battery before touching any component inside the computer to avoid hurting the laptop or yourself.

If your computer is running out of battery quickly or will not power on when it is not plugged in, you might need to replace your battery. See the troubleshooting page for more advice.

  1. Turn off the computer and unplug the charger before going any further. Flip the laptop over so you can see the underside.
    • Turn off the computer and unplug the charger before going any further.

    • Flip the laptop over so you can see the underside.

    • Remove ten 7mm T5 Torx screws.

  2. Pry up the bottom cover with an opening tool. Start at the front edge of the cover and make your way along the sides.
    • Pry up the bottom cover with an opening tool.

    • Start at the front edge of the cover and make your way along the sides.

  3. Manta Precision Bit Set

    112 Bits für jede Reparatur.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Pull the bottom cover up and away from the back hinges.
    • Pull the bottom cover up and away from the back hinges.

  5. Remove the battery connector by tugging and wiggling the battery wire using your fingers or a pair of tweezers. Unplug the cable gently as the eight wires on the connector are very small and delicate. Unplug the cable gently as the eight wires on the connector are very small and delicate.
    • Remove the battery connector by tugging and wiggling the battery wire using your fingers or a pair of tweezers.

    • Unplug the cable gently as the eight wires on the connector are very small and delicate.

  6. Remove four 4mm Phillips #1 screws. Remove four 4mm Phillips #1 screws.
    • Remove four 4mm Phillips #1 screws.

  7. Pull the battery up and out of the chassis.
    • Pull the battery up and out of the chassis.

    • Handle the battery carefully. Touching the terminal may cause electric shock. Puncturing the battery may cause it to catch fire.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Mathew Shaham

Mitglied seit: 23.01.2020

458 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team S1-G6, White Winter 2020 Mitglied von Cal Poly, Team S1-G6, White Winter 2020

CPSU-WHITE-W20S1G6

3 Mitglieder

13 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 9

Letzten 30 Tage: 31

Insgesamt: 144