Einleitung

Follow this guide to replace a scratched or worn back cover for the Motorola Moto G5.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.
    • Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.

    • Pry with your fingernail or twist the spudger to release the back cover from the phone.

    Kommentar hinzufügen

  2. Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.
    • Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.

    Kommentar hinzufügen

    • Continue sliding the flat end of the spudger along the seam for the remaining sides of the phone.

    Kommentar hinzufügen

    • Lift the back cover and remove it from the phone.

    • To reinstall the back cover, align the cover with the phone and squeeze along the edges to snap the clips back into place.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Check out our Motorola Moto G5 Answers community for troubleshooting help.

Arthur Shi

Mitglied seit 03.01.2018

26.076 Reputation

92 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

114 Mitglieder

6.995 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 19

Letzte 30 Tage: 152

Insgesamt: 360