Einleitung

If the user has already visited the troubleshooting page and has determine the issue incurred is due to a faulty micro SD card reader,and cleaning the reader has not worked, then this will be the guide to use.

  1. Remove the six silver 11.4 mm Phillips #0 screws
    • Remove the six silver 11.4 mm Phillips #0 screws

    • Pry open the device using a plastic opening tool if necessary. To do this, locate the groves running along the side of the entire device and wedge it open.

    Kommentar hinzufügen

  2. Now that your device is open, remove the Styrofoam pad that covers the main circuit board. The adhesive should allow you to remove and replace it with ease.
    • Now that your device is open, remove the Styrofoam pad that covers the main circuit board. The adhesive should allow you to remove and replace it with ease.

    • Do this carefully to avoid tearing the pad.

    Kommentar hinzufügen

    • Remove the eight black 7.2 mm Phillips #0 screws from the top of the circuit board and remove the circuit board.

    Kommentar hinzufügen

    • Unscrew the one 7.2 mm Phillips #0 screw from the plastic piece covering the microSD reader.

    • Then, unscrew the two 7.2 mm Phillips #0 screws from the microSD reader and remove it from its fastening.

    Kommentar hinzufügen

  3. Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Andrew Gittens

Mitglied seit 22.09.2014

140 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team 4-5, Brown Fall 2014 Mitglied von USF Tampa, Team 4-5, Brown Fall 2014

USFT-BROWN-F14S4G5

3 Mitglieder

6 Anleitungen geschrieben

Where do you get the replacement parts?

clsutliff - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 279