Einleitung
Benutze diese Anleitung, um den Zähler für die Anzahl an Ladezyklen auf deinem Samsung Smartphone oder Tablet zurückzusetzen.
Diese Vorgehensweise funktioniert für die Reihen S20 (S20 FE, Note 20 und Note 20 Ultra nicht unterstützt), S21 (inklusive S21 FE), S22, S23 (inklusive S23 FE), S24, Z Fold 5, Z Flip 5, (Z Fold1, Fold2, Fold3, Fold4, Fold6, and Z Flip1, Flip2, Flip3, Flip4, Flip6 werden nicht unterstützt), A54, Tab S7+ (Tab S7 und Tab S7 FE nicht unterstützt) (Tab S8 Reihe nicht unterstützt) und Tab S9 (inklusive Tab 9 FE und Tab S9 FE+). Diese Anleitung wird aktualisiert, sobald Samsung weitere Modelle hinzufügt. Für weitere Infos gehe zu folgendem Artikel Samsung Self-Repair document.
Hinweis: das in der Anleitung verwendete Modell ist ein Samsung Galaxy Tab S7+, aber die Vorgehensweise ist für alle Samsung Geräte identisch.
Hinweis: Du benötigst einen Samsung Account.
-
-
Lade die Self Repair Assistent App hier herunter.
-
Öffne die "Meine Dateien" App.
-
Gehe zum Ordner "Installationsdateien" auf der linken Seite des Bildschirms.
-
-
-
Wähle die App auf der rechten Seite des Bildschirms aus.
-
Wähle "Installieren" um die Installation der App zu bestätigen.
-
Überspringe die nächsten beiden Schritte.
-
-
-
Gehe zum Ordner "Downloads" auf der linken Seite des Bildschirms.
-
Klicke lange auf die Download-Datei bis ein orangenes Symbol links daneben erscheint.
-
Gehe nach unten auf dem Bildschirm und wähle "Mehr" aus.
-
-
-
-
Wähle "Umbenennen" aus.
-
Lösche die Dateiendung .jar am Ende des Dateinamens.
-
-
-
Wähle die Galaxy Cal App aus.
Bei meinem S20 FE 5G kommt beim Starten der App die Meldung:
This Model is NOT Supported
Gibt es sonst noch eine Möglichkeit?
Says galaxy s20fe is not supported?
I want FE support as I have an S20 FE 5G.
On my S9 it installs but the window of the app closes instantly after opening.
-
-
-
Wähle "Zustimmen", ("Agree") um die Nutzungsbedingungen zu bestätigen.
-
-
-
Wähle das Symbol "Battery" ("Akku").
-
Wähle "Calibrate" ("Kalibrieren"), um fortzufahren.
-
-
-
Wähle "Start".
-
Wähle nochmals "Start".
-
"Ok" beendet den Vorgang.
-
Warte, bis das Zurücksetzen der Anzahl an Ladezyklen abgeschlossen ist.
-
Möglicherweise musst du das Gerät selbst zurücksetzen, um den Vorgang auszulösen.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
11 weitere Personen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
33 Kommentare
Dead link to Samsung Self-Repair document.
Thanks for catching that! I fixed the link in the introduction.
I installed the galaxy cal app on an S20 and when opening the app I get a message to try again after getting new version
I have the same. Do you know how to fix this now?
simply change your phone date between 2021 and 2022.
When opening the app it says model not supported .I'm using a galaxy-s20-fe
I installed the galaxy cal app on an S20 and when opening the app I get a message to try again after getting new version
me too. cant find in store either
Set your phone date between 2021 to 2022
蓝泽希 -
Hello again, when the prompt show there yoy should get new version just simple change the date back in past
Good catch! I changed it to Sept 30 2022 and then the app started.
I installed the galaxy cal app on an S20, Android 13 too and when opening the app I get a message to try again after getting new version.
Tried on 3 devices, same result :(
Resetting the date was the right clue, thx :)
I have the same question that the application shows it needs updating before opening it. Version is SM-G9860, Oneui5.1
I hope to see an increase in compatibility for the Note20 series.
Can you please add support for the fe series devices because I have an s20 fe 5g and need to replace my battery.
Would be nice to have, but not possible. As the Prolog says:
Diese Vorgehensweise funktioniert nur auf dem S20, S21, S22 und TabS7+ Modellen. Sie gilt nicht für Fan Edition (FE) Modelle. Diese Anleitung wird aktualisiert, sobald Samsung weitere Modelle hinzufügt.
"... Not suitable for the Fan Edition (FE) Modells. ..."
BenZ78 -
Can you please add s23 series support for in the future as I have an S23 Ultra. Also for those of you who have the "try again after getting new version" error just change your device's date to Oct. 1st 2022 or earlier.
Hallo,
danke für Euren Tipp.
Ich habe diese Version für mein S22 plus heruntergeladen und installiert. Nach dem Start der App, wollte die App aktualisiert werden. Habe ich gemacht und jetzt will die App eine Seriennummer meines Akkus. Version 2.0.10
Kann ich das irgend wie auslesen lassen?
Mfg
Is there a compatible version for the Samsung S10E?
Did you try the latest version 2.0.12 from the Samsungparts link in step 1 in the unverified but updated version of this guide?
Hi all. Why doesn't the program support Samsung 20FE? Is there a way to reset the charge counter?
Hallo
Leider sagt die app das ei e Verwendung auf dem s21fe nicht möglich ist. Gibt es dafür Lösungsansätze?
Use the latest version 2.0.12 in the unverified version of this guide. I tested it on devices in Samsung's Remote Test Lab and it should work for your S21FE.
Verwenden Sie die neueste Version 2.0.12 in der nicht verifizierten Version dieses Handbuchs. Ich habe es auf Geräten im Remote Test Lab von Samsung getestet und es sollte für Ihr S21FE funktionieren.
Change phone date to 2021
when i start the calibration, the apps shows that need a serial or qr of the battery, how can i get it?
at the back of the battery there is QR code or at the front I am not so sure which one to use. there is also serial number beside the QR code at the back
Hallo, can i use it for my galaxy S21 5G ?
Yes I've tested it on that model in Samsung's Remote Test Lab on their developer website and it works.
The Self Repair Assistant is now working on one ui 6.1
Jayson Chua - Antwort
Je trouve mas l'application
Oussama Reddaf - Antwort
Make sure to set your phone date to year 2022 before using this app version. If you don't, it will not work and ask you to download the latest version.
Do not use the latest version of this app as it will ask for Samsung-made battery serial number (really Samsung. copying Apple for this is anti-consumer).
Peter Chang - Antwort