Will not power on, hear a slight fan sound but then nothing.

Question

iMac Intel 21.5" Mitte 2010

Modell A1311 / Mitte 2010 / 3,06 & 3,2 GHz Core i3 oder 3,6 GHz Core i5 Prozessor

343 Fragen Alle anzeigen

Ian Hurley @ianhurley51729

Rep: 13

1

Veröffentlicht: 28. Apr 2015

Einstellungen

Will not power on, hear a slight fan sound but then nothing.

The machine was running, when I can back to my desk the screen was blank. I tried to power it on but nothing happened. Checked all the cords and removed all external devices. How do I test to see if it's the power supply or something else?

I replaced the power supply as instructed, but the machine still will not start. It sounds a little different when tiring to start, I hear what sounds like the HD spinning. Checked the LED test lights and still only the #1 is lit up.

Thanks

Ian

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 1

1 Kommentar

OK, I replaced the power supply but no difference. Maybe the hard drive sounds like its running?

30. Apr 2015 von Ian Hurley

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

mayer @mayer

Rep: 685,9 Tsd.

MacHale Enterprises

3,4 Tsd.

1,1 Tsd.

2,6 Tsd.

Veröffentlicht: 28. Apr 2015

Einstellungen

You need to take a look at the diagnostic LEDs. Take a look at this question for how to interpret them and location: Where are the diagnostic led's on this model's logic board

War diese Antwort hilfreich?

Ja Nein

Bewertung 2

7 Kommentare:

Try using this guide but not disconnecting the cables yet. Just lean the display forward and see if you can see the LEDs. iMac Intel 21.5" EMC 2389 Display austauschen

28. Apr 2015 von mayer

Do I remove the display first

28. Apr 2015 von Ian Hurley

I can not disconnect the LCD thermal sensor cable connector from its socket on the logic board.Does not want to pull off. Am I missing something?

28. Apr 2015 von Ian Hurley

I got the display cable off. Plugged the computer in. The only LED light that comes on is the #1. It stays on but that's it. Pressing the power button results in what sounds like the hard drive trying to start up. A couple of clicks then nothing.

28. Apr 2015 von Ian Hurley

Replace the power supply. Here's how: iMac Intel 21,5" EMC 2389 Netzteil austauschen Here's the part: iMac Intel 21.5" (Late 2009-Mid 2011) Power Supply

28. Apr 2015 von mayer

2 weitere Kommentare anzeigen

Einen Kommentar hinzufügen

OK, I replaced the power supply but no difference. Maybe the hard drive sounds like its running? — Ian Hurley
Try using this guide but not disconnecting the cables yet. Just lean the display forward and see if you can see the LEDs. iMac Intel 21.5" EMC 2389 Display austauschen — mayer
I can not disconnect the LCD thermal sensor cable connector from its socket on the logic board.Does not want to pull off. Am I missing something? — Ian Hurley
I got the display cable off. Plugged the computer in. The only LED light that comes on is the #1. It stays on but that's it. Pressing the power button results in what sounds like the hard drive trying to start up. A couple of clicks then nothing. — Ian Hurley
Replace the power supply. Here's how: iMac Intel 21,5" EMC 2389 Netzteil austauschen Here's the part: iMac Intel 21.5" (Late 2009-Mid 2011) Power Supply — mayer

iMac Intel 21.5" Mitte 2010

Will not power on, hear a slight fan sound but then nothing.

1 Antwort

Antwort hinzufügen