Repariere deine Sachen Community Store

Modell A1989, EMC 3358. Das bisherige Design wurde aufgefrischt, die Auswahlmöglichkeiten für die Prozessoren und die Materialien der Tastatur verbessert. Erhältlich in Silber(Silver) und Grau (Space Gray) . Erschienen im Mai 2019.

135 Fragen Alle anzeigen

Einstellungen

MacBook screen blue (no apple logo) after replacing bezel front trim

So I had replaced the bottom strap on screen (where name of MacBook is) and now my MacBook switches on to dark blue screen. No logo, no chime, no nothing on screen, caps lock works. What could be wrong. Did I over heat anything? Nothing seems to be broken nor ripped from "ribbons" at the bottom of screen, I just can't get it to load regular screen. During process of heating the aeria I saw laptop booted and screen was while with login, flickering and came back to colored and normal so I switched it off and finished and now nothing.

I tried reseting Command+Option+P+R keys together nothing.

Any help and hints much appreciate it.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

Ouch! Sounds like you were a bit aggressive with the heat gun and/or damaged the cables. The T-CON board is very close to the hinge area as you can see here.

Block Image

Sadly, its time to replace the full display assembly MacBook Pro (13 Zoll, Ende 2016, Touch Bar) Displayeinheit austauschen

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

4 Kommentare:

Any other solutions to try before taking it apart? Seem I have 2019 pro with touchbar .Any other ideas even if low percentage of success rate?

von

@absolutelyfabfad - OK so you elected the wrong system, I'll fix that. Sorry no magic ;-{ You need to replace the display.

Here's the proper part for your system 13" MacBook Pro Complete Display - Space Grey and the guide for it MacBook Pro 13" Touch Bar 2019 Display tauschen

von

Do you guys think apple would be able to replace just the T-CON Board or also will they go for whole LCD?

von

@absolutelyfabfad - Apple will only replace the full assembly, which includes the T-CON board as that is hardwired to the LCD panel.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

absolutelyfabfad wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 9

Letzte 30 Tage: 13

Insgesamt: 186