Repariere deine Sachen Community Store

Modell A1989, EMC 3358. Das bisherige Design wurde aufgefrischt, die Auswahlmöglichkeiten für die Prozessoren und die Materialien der Tastatur verbessert. Erhältlich in Silber(Silver) und Grau (Space Gray) . Erschienen im Mai 2019.

135 Fragen Alle anzeigen

Einstellungen

Missing Hall sensor mystery.

My MacBook Pro (A1989) should have two hall sensors on most extreme position of motherboard. I found out, that my MacBook has only one. The other sensor pins has just connected two connection positions (middle two facing towards display). From time to time, it happens, that when I close the lid, Mac falls to hibernation, but does not wake up, when I close the lid. I am puzzled.

I was wondering, where to get second sensor, or how to make this more stable. I guess current state with shorted pins is but unusual.

Can you help?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Are you sure you selected the correct model here? This systems board number is 820-00850 Double Check. Take a picture of your boards hall sensor/s and where the missing one would be Bilder zu einer vorhandenen Frage hinzufügen

Block Image

Update (06/21/2021)

@Ivo Hanuška - Your board number doesn’t make sense!

As you can see for these systems all are 820-xxxxx (five digits) Apple loves hiding it and the very newest one have a new code system a QR tag and a four alphanumeric code.

Block Image

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

2 Kommentare:

Hi,

My board has different number, but very similar (if not same) layout. My number is 1320-2746. Pins are shorted by some form of glue/varnish. I was measuring resistance of connection and it was about 2 ohms. I guess this is some form of quick fix of previous owner. Maybe they blocked this sensor somewhere in software, since I had to clear NVRAM and SMC few times. I have no Idea what components are on sensor sub board I can not guess what should be output with closed and opened lid.

I just do not know and I’m puzzled.

von

@Ivo Hanuška - Please post some images so we can see things.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Ivo Hanuška wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 12

Letzte 30 Tage: 27

Insgesamt: 326