Am 31. Oktober 2019 als Teil von Googles „Android One“-Programm veröffentlicht (welches eine „reine“ oder weitestgehend unveränderte Android-Betriebssystem-Implementierung garantiert, bei der Google-Dienste Vorrang vor OEM-eigenen Angeboten haben). Es wird mit den Modellnummern XT2013-1, XT2013-2 und XT2013-4 identifiziert (Codename „troika“).
Schau durch den Thread, bis du den richtigen Platz für diesen Kommentar gefunden hast. Klicke dann auf "Den Kommentar diesem Post zuordnen", um ihn zu verschieben.
7 Kommentare:
@hamidmasoumi really hard to make out. Take another picture just this time zoom out so we can see the whole board,. Then mark the place where you see this object. Then do a close up but ensure that you save a large, well focused image. The one you added is only 570x286 and does not enlarge well.
@oldturkey03 Sorry my microscope is not that good, I just need the general description, I can get its value from its neighboring components but I don't what is it to measure.
First I thought it might be an inductor for the phone loud speaker.
@hamidmasoumi if you can point out where it is on the board, I can use the schematic to identify it. Right now, I have no idea where it is located. Just use a phone camera etc. and take a picture identifying the general location.
@hamidmasoumi of course it had to be the sub board :-) No, sorry I do not have that either. Looking at the location I would think it's a coil (ferrite bead)
@hamidmasoumi really hard to make out. Take another picture just this time zoom out so we can see the whole board,. Then mark the place where you see this object. Then do a close up but ensure that you save a large, well focused image. The one you added is only 570x286 and does not enlarge well.
von oldturkey03
@oldturkey03 Sorry my microscope is not that good, I just need the general description, I can get its value from its neighboring components but I don't what is it to measure.
First I thought it might be an inductor for the phone loud speaker.
von Hamid Masoumi
@hamidmasoumi if you can point out where it is on the board, I can use the schematic to identify it. Right now, I have no idea where it is located. Just use a phone camera etc. and take a picture identifying the general location.
von oldturkey03
@oldturkey03 Sorry for the quality in advance.
Do you have its sub board schematics?!!
I could only find its main schematic that I uploaded here.
von Hamid Masoumi
@hamidmasoumi of course it had to be the sub board :-) No, sorry I do not have that either. Looking at the location I would think it's a coil (ferrite bead)
von oldturkey03
2 weitere Kommentare anzeigen