Battery
|
1 Antwort 1Punkte |
Why can't I depress the trigger? |
|
1 Antwort 3Punkte |
Drill will run for only a few seconds |
|
1 Antwort 1Punkte |
Why is the drill making strange clicking sounds when in use? |
|
4 Antworten 1Punkte |
release the chuck with stuck drill bit |
Werkzeuge
Es werden einige allgemeine Werkzeuge verwendet, um an diesem Gerät zu arbeiten. Du wirst nicht jedes Werkzeug für jeden Vorgang benötigen.
Troubleshooting
Identify hardware issues with the Ryobi P202 troubleshooting guide.
Background and Identification
The Ryobi P202 is part of the Ryobi One+ 18 volt cordless tool system. It is sold in the Ryobi P817 kit with a charger, battery, and carrying case. It is compatible with both the original NiCad and newer Lithium Ion battery packs. With the trigger pointing right, the label on the side of the drill shows a warning label as well as the identification name of P202.
This model has neon green plastic with grey rubber coverings. It has a built in level gauge and a two speed switch on the top of the drill. A magnetic tray, and drill bit clip are found on the base of the drill. The drill has a pressure sensitive trigger and has a maximum RPM of 1600 as seen on the warning label.
Technical Specifications
- 18-Volt
- Holds up to 1/2 inch drill bits
- Spins up to 1600 RPM
- 24 torque settings
- Level gauge
- Magnetic tray
- Drill bit clip holder
