Repariere deine Sachen Community Store

Sostituzione cover posteriore Nintendo 3DS

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 25 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Italienisch
Nächster Schritt

Schritt 1 übersetzen

Schritt 1
Nintendo 3DS Back Cover Replacement, Loosen the rear screws: Schritt 0, Bild 1 von 1
Loosen the rear screws

  • Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover.

  • All screws in this device are JIS screws. Official iFixit PH000-PH1 Phillips screwdrivers are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in stripped screws.

  • The screws are held in place by locking washers, and will not come out of the back cover.

Hier Übersetzung einfügen

Usa un cacciavite Phillips PH00 per allentare le quattro viti lungo la parte superiore della cover posteriore.

Tutte le viti in questo dispositivo sono viti JIS. I cacciaviti Phillips PH000-PH1 ufficiali di iFixit sono progettati per essere compatibili con le viti JIS, quindi sono sicuri da usare. Usare un cacciavite diverso da un cacciavite ufficiale iFixit o da un cacciavite JIS potrebbe causare lo spanamento delle viti.

Le viti sono tenute in posizione da rondelle di bloccaggio e non usciranno dalla cover posteriore.

+[title] Loosen the rear screws
[* red] Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover.
[* icon_note] All screws in this device are [guide|93991|JIS screws|stepid=176809|new_window=true]. Official [product|IF145-006|iFixit PH000-PH1 Phillips screwdrivers|new_window=true] are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in [guide|13213|stripped screws|new_window=true].
[* icon_note] The screws are held in place by locking washers, and will not come out of the back cover.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.