Von Studierenden verfasstes Wiki
Ein tolles Team von Studierenden aus unserem Bildungsprogramm hat dieses Wiki erstellt.
Der Lautsprecher lädt nicht/schaltet sich nicht ein
Der Lautsprecher reagiert nicht oder zeigt keinerlei Anzeichen dafür, dass er sich einschaltet.
Defektes Ladekabel
Wenn an deinem micro USB-Kabel Abnutzungserscheinungen zu sehen sind, versuche es mit einem anderen funktionierenden micro USB-Kabel. Es kann sein, dass die Drähte im Inneren verschlissen sind.
Beschädigter Ladeanschluss
Wenn der micro USB-Ladeanschluss verbogen oder lose ist, kann sich das Ladekabel möglicherweise nicht gut genug verbinden, um zu laden. In der Anleitung zum Austausch des USB-Anschlusses wird gezeigt, wie ein defekter Ladeanschluss ersetzt wird.
Defekter Akku
Wenn der Lautsprecher nur funktioniert, wenn er angeschlossen ist, kann es sein, dass der Akku defekt ist. In der Anleitung zum Austausch des Akkus wird gezeigt, wie ein Akku ersetzt wird.
Defekte Platine
Es ist schwierig, dieses Problem mit Sicherheit festzustellen. Wenn die vorherigen Lösungen nichts gebracht haben, kann es unter Umständen an einer defekten Platine liegen. Allerdings werden beim Zugreifen auf die Hauptplatine zwangsweise Teile des Lautsprechers kaputt gehen.
Tasten reagieren nicht
Dies Tasten auf dem Lautsprecher leuchten nicht auf oder reagieren nicht.
Defekte Platine unter der Einschalttaste
Da der JBL Flip 4 sehr gut versiegelt ist, ist es eher unwahrscheinlich, dass die Tasten durch Schmutz blockiert werden. Der Hauptgrund für nicht reagierende Tasten ist meistens eine defekte Kontrollplatine. Um an die Kontrollplatine unter die Tasten zu gelangen, benutze die Anleitung zum Austausch der Kontrollplatine. Trenne das Kabel, das mit der Kontrollplatine verbunden ist, ab und stecke es erneut ein. Wenn die Lämpchen auf der Platine nicht aufleuchten, dann ersetze die Platine. Wenn die Lämpchen aufleuchten, sollte der Lautsprecher wieder funktionieren.
Beträchtlicher Verlust der Akkulaufzeit
Dein Lautsprecher hält keine Ladung mehr oder schaltet sich sofort aus, wenn er ausgesteckt wird.
Defekter Akku
Wenn der Akku zwar lädt, die Ladung aber sehr schnell wieder verliert, kann das daran liegen, dass die nutzbare Kapazität eines Akkus nachlässt, je mehr Ladezyklen er durchläuft. Daher hält ein neuer Akku wesentlich mehr Ladung als ein alter. In der Anleitung zum Austausch des Akkus wird genau erklärt, wie man einen Akku ersetzt.
Der Lautsprecher lässt sich nicht über Bluetooth verbinden
Dein Lautsprecher lässt sich nicht über Bluetooth mit einem Gerät verbinden, wenn er eingeschaltet ist.
Verbindung zu einem anderen Gerät
Wenn sich ein anderes Gerät, wie ein Smartphone, ein Fernseher oder Computer, mit dem dein Lautsprecher bereits einmal verbunden war, in Bluetooth-Reichweite befindet, kann es sein, dass es sich bereits mit deinem Lautsprecher verbunden hat, was eine Verbindung zu einem anderen Gerät verhindern kann. Der JBL Flip 4 kann sich immer nur gleichzeitig mit einem Gerät verbinden. Um dieses Problem zu beheben, muss du das störende Gerät ausfindig machen und den Lautsprecher von diesem Gerät trennen.
Wenn du das störende Gerät nicht ausfindig machen kannst, versuche, den Lautsprecher und das Gerät, das du verbinden willst, zu isolieren. Du kannst zum Beispiel in einen anderen Raum gehen, um den Lautsprecher physisch von dem störenden Gerät zu trennen. Schalte dann den Lautsprecher erst aus und dann wieder ein, sodass dein Gerät, das du verbinden möchtest, das erste ist, mit dem sich der Lautsprecher verbindet.
Interferenzen von Geräten in der Nähe
Es ist möglich, dass ein Gerät in der Nähe deines Lautsprechers Signale mit derselben Frequenz aussendet, wie die, mit der sich der Lautsprecher über Bluetooth verbindet. Bei diesen Geräten handelt es sich meistens um WLAN-Router, Babyphone oder andere kabellose Lautsprecher. Um dieses Problem zu beheben, entferne alles, was den Lautsprecher blockieren könnte, oder schalte das störende Gerät neu ein.
Fehlender Bluetooth-Audiotreiber
Manchmal können sich Bluetooth-Geräte nicht richtig mit Computern verbinden, da die Computer nicht über die für Bluetooth notwendige Software verfügen. Die meisten Computer haben den gängigen Bluetooth-Audiotreiber, den der JBL Flip 4 nutzt, aber wenn es so aussieht, als sei das bei deinem Computer nicht der Fall, musst du dich an den Hersteller deines Computers wenden, um die erforderlichen Audiotreiber herunterzuladen.
Knisternde Geräusche
Beim Abspielen von Audio macht dein Lautsprecher knisternde Geräusche oder Störgeräusche.
Gerät ist außerhalb der Reichweite
Das verbundene Gerät ist möglicherweise zu weit von deinem Lautsprecher entfernt. Die Bluetooth-Reichweite beträgt etwa 9 Meter. Wände oder ähnliche Hindernisse können die Reichweite verringern. Um das Problem zu beheben, stelle deinen Lautsprecher näher an das Gerät.
Beschädigter Treiber (Lautsprecher)
Wenn die anormalen Geräusche nicht elektronisch klingen, oder wenn sie bei bestimmten Tonlagen und/oder Lautstärken auftreten, kann möglicherweise der Treiber des Lautsprechers kaputt sein. Um einzelne Lautsprecher zu ersetzen, folge der Anleitung zum Austausch der vorderen Aktivlautsprecher.
Inkonsistente elektrische Verbindungen
Wenn die vorherigen Lösungen nichts gebracht haben, kann das Problem an schlechten elektrischen Verbindungen im Inneren des Lautsprechers liegen. Leider ist es sehr schwierig, diese schlechten elektrischen Verbindungen, die alles von defekten Lötstellen bis zu losen Steckern sein können, zu lokalisieren. Außerdem gehen beim Zugriff auf die Hauptplatine zwangsweise Teile des Lautsprechers kaputt, was die Leistungsfähigkeit des Lautsprechers beträchtlich verschlechtert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
103 Kommentare
My jbl flip 4 is not taking up charge it only works while plugged in. What can I do to fix this problem
Tito - Antwort
Mine did the same thing, you need a new battery, go to amazon, it’s about $17, very easy fix.
Dan M -
it keeps cutting off after about an hour. i’ve reset it several times, but it continues to do the same thing. any suggestions?
Lyn Steyne - Antwort
My jbl flip4 ‘s sound is crackling while playing and then will shutdown… BatteryBattery life has become short…
But it plays normally while charging
Please help!
Jayakrishnan - Antwort
I have the exact same problem as Jayakrishnan
Please help!
Daniel -
I have same issue
furrdonker -
I have the exact same thing, I'm going to email JBL as this shouldn't be an issue with normal
Fishman 02 -
same problem. is there a way to do some kind of reset on it?
split917 -
Same issue here, has anyone managed to possibly pinpoint the issue, anyone tried a new battery to see if it would work?
Warren Scantlebury -
Mine is doing the same, trying to find why ….only used indoors and on normal volume. Its little over one year old
Johnny Appenzeller -
i have the SAME problem i thought i was all alone in this.. anyone try any troubleshooting that fixrd this problem? before i start doing tons of stuff that i may not need to be doing.
heathernicole562 -
Me too. I have two Flip4s and the older one is the one that plays fine for an hour or so… maybe less, then crackles a bit and shuts down. The newer one works just fine.
_eric -
For those still or now suffering from this issue I've replaced my battery and the speaker works great now
Warren Scantlebury -
My son's Flip 4 keeps turning on, making some 2001 Space Odyssey noises and some drum sounds, then off, then repeat. It is now wrapped in a towel and in the garage. Any thoughts? (Yes, it was in a pool and I can't guarantee it wasn't <30 mins or <1metre.
Gail - Antwort
Mine powers on and charges just fine, but all the buttons on the side (play/pause, volume up, volume down, and bluetooth) do not work, therefore I cannot factory reset the speaker or make new connections, but can still pair to remembered devices. I’ve already tried plugging back in the cable from the inside and it did not help. Anyone know how to fix this?
pls no - Antwort
If I pause music for a while and then return to it again after a duration of say, maybe 2 minutes (although it’s random), My JBL Flip4 will be crackly and stutter the sound until I reset the bluetooth connection. I only have this problem with my computer, my phone is fine. Also sometimes it just randomly turns itself off and I’ve read if the sound frequency is too quiet it will do that? Please let me know if there’s a way to fix these issues besides playing it loudly, on my phone or not pausing music.
Hanabi - Antwort
My flip 4 bluetooth is not staying connected no longer than 2-4 minutes and NO OTHER BLUETOOTH DEVICES are PRESENT for INTERRUPTING CONNECTIONS
Chikiz Marie - Antwort
Mine will say its connected (no other devices interfering) and make the powering up noise but not the connecting guitar sting sound to be actually connected. On my laptop it says its “ready to go” But it’s not.
John Girardot - Antwort
my speaker will not cut on. my husband tried to reset it the other night and held down the wrong button and it has not cut on since. please help!! i love this speaker!!
Melissa Meeks - Antwort
I just bought a charge 4 to use with my iPhone 8s plus. On Bluetooth it was working fine. Now it won’t sync with phonecalls but it will sound text alerts. It syncs with apps like YouTube just fine. I downloaded the update.
Lina Monroy - Antwort
Flip 4 powers on for a few seconds then shuts off. Please help!
jakophathcock - Antwort
The sound with aux port using a cable goes mute in quiet parts of symphonies or other music fix it
nicolas.guzman.padilla - Antwort
My JBL Flip 4 keeps turning on and off by itself and will not respond to power button. It connects and everything but keeps doing stuff by itself. What could it be? HELP PLEASE!!!
Alejandro Barahona - Antwort
my jbl 4 is not responding and not charging…
Please help
Bafana Nkosi - Antwort
My JBL 4 is connected and charged, buttons work, but no music. I’ve reset him a couple of times, with no results. Can’t find the answer to this problem. Help is greatly appreciated!
purr2me - Antwort
this sounds like my problem! It Bluetooths to my computer, the sound from my computer stops on connection, but fails to start coming out of the speaker - just silence… did you solve your problem? Can you help me?
Helen Sheridan -
No problem! I just took removed it from my laptop via settings and repaired it again, and its working fine! What a relief! Hope you got yours sorted.
Helen Sheridan -
My JBL flip 4 is turning on but it exactly goes on the Bluetooth searching device and it won’t connect to my phone and what cause that is that i press on the play button and the volume up button and now I can’t pair to my speaker please help me I don’t know what to do ?
Raphael - Antwort
try a hard reset. instructions below.
aashat -
My unit keeps shutting down after about 30-60 minutes. It is fully charged and simply requires to be turned back on, connected by Bluetooth and then works fine…..for 30-60 minutes and shuts down again. Sometimes it shuts down after shorted periods of time. Very annoying…..is there something that can be done about this?
Lachlan Payne - Antwort
My Up and Down volume buttons wont work and when i press up it wont even do anything
Katlynn Grande - Antwort
Volume down button not working = = . And ghosting Spam pressing volume down button. Any fix for this ?
Choy Yew - Antwort
(+) Volume up function not working. When i pressed volume up button for high volume, it works same as play/pause button instead of volume up. Please suggest what to do??
ANKIT KAMBOJ - Antwort
My jbl flip 4 will not power on at all.
Michelle Trice - Antwort
I held down the ( + button and bluetooth button together for 30 sec to reset it ) it turned off and wont come back on
samhurst256 - Antwort
Mine not staying on with battery. But if I press and hold the power button its working. And if I release the power botton it died again.
Working as normal powered by usb cable
Rob Pampanga - Antwort
My flip 4 passive radiators make cracking sounds even at low volumes. Is there any fix? Where can I find replacement parts online?
mikablc - Antwort
Hello My flip 4 works fine but don't charge i try diferents Chargers and USB cables and won't charge any ideas???
cs_lagos - Antwort
I have found that I have to use the cables that were supplied with my Flip4s. Perhaps the wiring is configured differently than standard cables? Mine are bright orange cables.
_eric -
I fixed the bad BT connection issue (crackle in one speaker) for connected pair of Flip4’s on a Macbook Pro 2018 (working 95% of the time). Seems there is a setting that you can’t change without some effort. JBL won‘t tell you this b/c its an “apple issue”. Keep in mind that there is no app for non-mobile devices at this point. So, only Party (mono) is possible.
Procedure:
1. go to apple site: www.develop.apple.com/download/more
2. search additional tools
3. download latest additional tools for Xcode
4. install
5. Open the containing folder, open hardware, open BT Explorer
6. in BT Explorer go to Tools/Audio options, check the box: Force use of AtpX
https://www.youtube.com/watch?v=PkBwuXwh...
aashat - Antwort
Hard reset for Flip4 is: Turn on device, press and hold “+”volume and “Play” button for 10 sec (on the side of the speaker.) Turn off. Turn on again. It will erase all previous BT connections, so you will need to re-pair with your device.
aashat - Antwort
Bluetooth won’t start…no sound for Bluetooth is on.. I try factory reset but can’t even be resetet..Solutions ???
igor markoski - Antwort
My job flip4 does not charge. Red blinking light when connected but does not charge at all or starts when connected. Any suggestions?
Adriana Valencia - Antwort
My JBL FLIP 4 doesn’t power up. Is there a sight to order new circuit and control boards?
Travis Williams - Antwort
My jbl flip 4 keeps on turning off
anyone got something to help pls
BARUACH LEFKO - Antwort
It seems that we all are having the same problems, but with no resolution, bottom line it’s a piece of crap product with a high price point, I won’t be buying another JBL product!!
Dan M - Antwort
My flip 4 doesn’t charge as well. One red blinking light… I’m think I’m turning into one… :-)
Todd McNeil - Antwort
Button is unresponsive what to do..?
Plz help
Rajashree ganesh - Antwort
What Lyn said.
oversight - Antwort
Yo my jbl flip4 maybe battery dead after try it in pool because i trust it waterproof after using it for 1years+. When charge it will power on for 7sec then shut down/power off .battery indicator only blinking red so what is the problem btw? Battery or damage ic unit .when not charge it icannot power on, but plug in charger it will on by its self for 7sec then off by it self repeated as long i didnt remove charge
Helpmejbl - Antwort
I have 2 flip 4’s. Having trouble keeping both connected to iPad.
Linda Miller Andries - Antwort
Mine crackles & pops, then shuts down, with more than 1/2 than battery charge left. When I start up again, it plays fine for a while, then dies same thing. This has worked fine for lore than 2 years, now does this all of a sudden.
Steph H - Antwort
Hi my JBL flip 4 works good but for 2mins only and then some crackling noise comes and it gets turned off…I have tried to open the panel and checked the motherboard and found that there is red led which flash when the crackling noise comes and it gets turned off…. Kindly suggest how to fix the problem
love_ahuja - Antwort
Mine did the same thing, you need a new battery, go to amazon, it’s about $17, very easy fix., YouTube has videos to how to change the battery, don’t buy the tools with battery.
Dan M -
My jbl 4 would not charge it keeps showing one charge light and can never get to full. I turn it on and it’s just turns itself off
Grace - Antwort
Mine did the same thing, you need a new battery, go to amazon, it’s about $17, very easy fix., don’t buy the tools with battery, they are cheap, You Tube has. Ideas to show how to change the battery, very easy
Dan M -
I bought this flip 4 and received it today.
It's not getting paired to any of the device. Kindly help
nishugupta944 - Antwort
my JBL FLip 4 will only turn on when plugged in. Once plugged in, none of the buttons work and once I unplug it, the device turns off. Please help.
Matt Zafran - Antwort
My JBL flip 4 stopped working. I bought a new cord and charging port and still nothing. The light just blinks red like it's charging but never does. I replaced the battery but it still just blinks red and now also is emitting a high pitch whine while plugged in. Any suggestions appreciated
Felicia Larson - Antwort
My JBL flip 4 speaker fell down from a high platform and now it won’t open. The buttons don’t light up or make a sound like they used to. It was charged and even when I plugged it in the charges still it’s unresponsive. What should I do. Please tell me I can fix it, I just got it. I don’t believe there’s a JBL store in my country, as I bought mine online. Please tell me what I can do…I can’t afford a new one :(
Thank you
Yasminee Weshahy - Antwort
Hi my JBL flip 4 charges and make the noise when connected. But it won't turn on. When I unplug it it looks like dead. And it is charged. It looks like it has an issue in the power button. How can I resolve that? I opened it but still not working!
Any suggestions?
Thanks!
Emilia Otheguy - Antwort
If any body have problem like button working and sound not coming from any device.Unpair it from your mobile.and computer and then press ‘play putton and volume up button‘for 10 second .Then press start button for 3 second then connect it .This will help you to get the sound back. If not work try again and again because my problem solved like this.
cocvaibhave - Antwort
My JBL flip 4 speaker suddenly stopped working it won’t light up when charging or even turn on.
Lyssa K - Antwort
My JBL flip 4 wont turn on, however when I plug it in it shows that it is charging and is full. I can’t turn it on even when plugged in. Reset won’t work as it needs to be turned on to do so.
Josh Irvine - Antwort
Replaced charging cord on JBL Flip 4 and all I get is a flashing red light for a few seconds then it goes out. Cannot charge. Please advise on other ways I can troubleshoot.
JP 8/10/2020
Jane Pridgen - Antwort
Will not charge, but blue tooth light in, power button not coming on.
Laura Danner - Antwort
Mine will neither charge nor power on. This was a highly recommended product and while not spendy/-if it HAD worked as advertised/- exceedingly disappointing product. Furthermore, it was touted as having dynamic volume capacity and it sounded little more complex than my girst first transistor radio was in 1973. Junk junk and more junk/- weary of the spate of crap product coming from china and its clinet states these past 3-4 years. Have a900$ junk Lenovo ThinkPad, as well. China and batteries = piffle
Mary Lea McTurnan - Antwort
Power button not responding
Linda - Antwort
My JBL flip 4 is charged but power button won’t turn it on. Any suggestions please.
Linda - Antwort
2 months old, my 4 stopped paring with ANY device. Won’t reset either. Had nice sound for 6 weeks. Now it’s worthless.
Paul Kramer - Antwort
the control board replacement guide advice is unsound. unlatching the cable is very difficult and needs to be done with extreme caution - the head of my cable disconnected from the cable during this step, and my speaker is gone. please revise and give this step the right attention!
Roey Yohai - Antwort
I lost my speaker about 10 hours ago, is there anyway I can find it ?
Josieayers - Antwort
hey, my jbl flip 4 has all audio etc working but the second it goes above half volume, all of the sound goes. even the jbl connect, power, and max volume sounds. i’m unsure why this is happening, seeing as it works perfect below half volume. please help, thanks.
Tolan Clark - Antwort
My flip 4 won’t take a charge but the lights are blinking
Brent&Carrie Parr - Antwort
My jbl will not stay on, even when plugged in.
Patti Hamilton Smith - Antwort
Hey so my JBL FLIP 4 just keeps automatically turning the sound up even tho i am not toughing the button, it always happens. Any recommendations?
Adam - Antwort
Buenas, a mi jbl lo enchufo y carga solo ub punto y se queda tildado ahí, no carga mas y queda la luz prendida….que puede ser?
Lucas Luca - Antwort
What is the white wire that is connected to the speaker
Edgar Montes - Antwort
My jbl flip 4, all others button unresponsive EXCEPT ON/OFF button. Battery level lighting indicator also not working. However speaker works as usual. But due to unresponsive button not able to connect to new devices / phones. What should i do?
Remy Martin - Antwort
My flip 4 dies while plugged in to charge. Any thoughts on the issue? The battery life is nonexistent.
Donna - Antwort
The bluetooth range has suddenly decreased exponentially. It used to connect perfectly fine from up to 20+ feet away. Walking around my apartment with the sound being perfect. Now if my phone is 5 or more ft away it starts to break up or not play at all until my phone gets closer again. Haven’t gotten a new phone, its Iphone X and I have a Flip 4
Edward DeMartino - Antwort
My jbl flip 4 stops when I press + or - to change the volume. The light is still on, but there is no sound anymore.
Brigitte Esselaar - Antwort
My jbl flip fell from a big hight. Now it’s only responding while charging and even then it doesn’t play any music. Everything else works even connecting it via Bluetooth but it remains silent. Also the rubber part on one side is torn. Do you think that might be a problem or is the rubber only important for the whole thing to be water proof?
Thank you a lot in advance :)
meretpw - Antwort
I found some of the cables are worn out and cut. Should I return them
Foued Gharbi - Antwort
I silmantaniously pressed the volume down and the pause key of my flip 4 and now it won't turn on by default, unless I connect my charger before it'll turn on and when it does too the keys won't work. It'll just be charging. Guys I need your help. Any bofy with an idea how I can fix this problem
Festus Gregory - Antwort
Hello,
asking for help. My flip connects no problem but if its farther than 7inches it won’t work. I have already reset and have done the update on the app. Still nothing. Even with other different devices I have the same problem. Please help me.
Gabriela Venegas - Antwort
My jbl flip 5 won’t on at all please help
ADEKUNBI TOLUWALOPE - Antwort
Hola mi JBL flip 4 se apaga y se prende sola todo el tiempo asta que se acabe la batería no se qué hacer porque nose cuál es el problema ayúdenme xfavor
Rony Roy Soncco Mamani - Antwort
My speaker goes on and works for a few seconds then shuts down. I’ve tried resetting with no results.
Tim DeMars - Antwort
I accidentally ruptured the ribbon cable.
I was trying to take out the old battery. It was bloated and stuck so I took it out by pushing it from the other side. In doing so the ribbon cable was broken. Is there a way to change it or is it too hard? I don't even know where or what to buy.
It was really hard taking the battery out to begin with :(
Carlo Ferrari - Antwort
mi JBL 4 conecta ( se ve en el PC), los controles funcionan (puedo dar Play o Stop desde el JBL) pero el sonido solo se oye en el PC… me pueden ayudar????
rmoreinis - Antwort
my friends JBL is turning on automatically when plugged in to charge and immediately turns off when i disconnect it again, i am unable to connect to it and none of the buttons work... does anyone have any suggestions on what i could do to fix it?
Lee-Lee nugget - Antwort
My jbl flip 4 the battery level lights remain on even when I turn it off. I already did factory reset, any suggestions please?
Harpreet Choan - Antwort
My jbl flip 4 used to connect with my iphone8, but now I have iphone13, iphone13 can’t find my jbl flip 4. Please help.
Aurelio Silvestre - Antwort
My JBL Flip 4 connects to my laptop at variable levels, sometimes showing "Connected voice, music" but still not playing any sound, including the test tones from settings. Other times it works fine, and I thought it was just something about making sure Bluetooth on my phone was turned off before turning on Bluetooth with my laptop, but that's still not working. No driver updates appear to be available. Any ideas?
love2research - Antwort
my j l speaker won’t charge or turn on and i’ve tried different cables what do i do
summer - Antwort
You need to replace the battery, you can buy them on Amazon. It’s easy to do, google how to change the battery, several YouTube videos
Dan M -
Cuando conecto el equipo a la corriente me funciona pero al subir el volumen me suena defectuoso , al cambiar el sonido a un solo canal si se escucha perfecto , que pudiera ser , es un JBL Flit 4?
jorge emilio milanes - Antwort
JBL filp3, Power on time only white light glow,,,
No power on sound,,,no power blue light glow
Harishkumar Meena - Antwort
I have a jbl flip 4
When I connect the charger, the first led on the front starts to blink white and stays that way for 7 hours.
Is this normal or should the other leds light up? What happens when the battery is charged?
Thanks in advance for your answer.
Best Regards.
Marcelo Fabian Gómez - Antwort
Las luces led quedan encendidas aún estando apagado
Carol Sagastume - Antwort
The speaker does not change the sound settings after I have set a new sound. How to fix?
Ellen - Antwort
Meine Flip 4 funktioniert einwandfrei und wenn ich auf den connect+ knopf drücke geht sie aus
Zoran - Antwort