Mac Pro 2006-2008 (First Generation) Reparatur Forum
FrageNorthBridge zeigt 96°läuft aber gut
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Das sind alle Fragen in deiner Sprache, aber hier sind einige andere, die hilfreich sein könnten:
Ambient Board compatibility in Mac Pros
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
It will turn on but no post on screen need help
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Screen powering on and then off
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
MacPro 3.1 doesn't start, but starts with a "Hack".
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Mac Pro 2008 FB-DIMM temperature
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
The love, the hate and the white light.
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Instructions on replacing the IDE CDROM cable
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
MacPro early-2008 (8X), power led on, fans spin, no chime, no boot.
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
No display and GPU connected
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Is it the graphics card or something else (LED diagnostic indicators)
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Mac Pro - fans on full speed after removing CMOS battery, no chime
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
My Mac Won´t Start Up / Il Mio Mac Non Si Avvia, Aiuto?
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Mac Pro blinking status LED?
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Cpu lights stuck on overtemp
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Mac Pro 3.1 not starting
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Processor upgrade fans max, no boot
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Mac Pro 4.1 (I think) won't boot
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
Flash Firmware From MacPro1,1 to MacPro2,1 OSX 10.7
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten
MacPro3,1 power issue? boot up issue? BR drive issue?
unbeantwortet Mac Pro 2006-2008 (First Generation) 0 Antworten