Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 13 Anleitungen, die diese beinhalten.
Schritt 19 übersetzen
Schritt 19
-
Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector.
-
Use the tweezers to pry the EMI shield away from the display as much as you can without bending it.
-
Repeat this procedure at different points around the shield until it is free. Remove the shield.
| - | [* black] Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector. |
|---|---|
| + | [* black] Insert one point of a pair of [product|IF145-020-2|pointed tweezers] into a gap in the edge of the EMI shield covering the digitizer connector. |
| [* black] Use the tweezers to pry the EMI shield away from the display as much as you can without bending it. | |
| [* black] Repeat this procedure at different points around the shield until it is free. Remove the shield. | |
| [* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly. |
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.