Schritt 7 übersetzen
Schritt 7
-
The best way to remove the diaphragms is to firmly squeeze the soft portion between the upper metal portion and the plastic actuator body.
-
Pry in one direction, and once the diaphragm is released at one edge it can be pulled off entirely.
-
Inspect the inside of the actuator body and clean if necessary.
-
Replace the diaphragms with the new ones, and coat lightly with synthetic grease like the dielectric grease used for spark plugs; this will help preserve the rubber.
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.