Zum Hauptinhalt wechseln

Beats Studio First Generation Headband Replacement

Hinweis: Du bearbeitest gerade eine grundständige Anleitung, die Teil der Anleitung ist, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen alle 3 Anleitungen, die diese grundständige Anleitung beinhalten.

Englisch
Deutsch

Schritt 6 übersetzen

Schritt 6
Beats Studio First Generation Headband Replacement, Removing the metal headband support.: Schritt 0, Bild 1 von 2 Beats Studio First Generation Headband Replacement, Removing the metal headband support.: Schritt 0, Bild 2 von 2
Removing the metal headband support.
  • Carefully remove the metal band from each of the hinge housings on each side. These should come off quite easily, provided that you have removed the hinges as instructed in step 3.

  • Congratulations, you have completely removed the headband! This will allow for ease of accessibility to the speakers should you choose to delve further into the depths of your headphones.

  • The black wire connecting the two speakers is somewhat fragile! Check that it isn't frayed. If it is frayed, consider repairing it with some electrical tape, splicing it, or replacing it.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.