Zum Hauptinhalt wechseln

Nintendo 3DSのSDボードの交換

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 15 Anleitungen, die diese beinhalten.

Englisch
Japanisch

Schritt 3 übersetzen

Schritt 3
Nintendo 3DS SD Board Replacement: Schritt 0, Bild 1 von 3 Nintendo 3DS SD Board Replacement: Schritt 0, Bild 2 von 3 Nintendo 3DS SD Board Replacement: Schritt 0, Bild 3 von 3
  • Insert the flat end of a spudger between the SD board and the motherboard.

  • Pry up slowly to loosen the SD board from the RF shield underneath it. If you pry too quickly, you may tear the shield or break its solder points.

  • Run the spudger along the sides of the SD board to free it from the adhesive holding it in place.

  • Once completely freed, lift the SD board straight off the motherboard.

SDボードとマザーボードの隙間にスパッジャーの平らな方の先端を差し込みます。

ゆっくりとこじり上げて、SDボードをその下にあるRFシールドから外してください。ここでこじるのが速すぎると、シールド自体やシールドの接合部を破損する恐れがあります。

SDボードの側面に沿って、スパッジャーを動かし、SDボードを留めている接着パッドを剥がします。

一度完全に剥がされたら、マザーボードからSDボードを垂直に持ち上げて外します。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.