Baby Taylor Guitar String Replacement

Einleitung

Follow my 9-step fast fix procedure to replace your Baby Taylor Guitar’s strings. Guitar strings become dull-sounding and lose their tone as they age, that’s why it’s important to know how to change your guitar strings at any time. When a string is broken or doesn’t sound as sharp as it used to, this guide will help you fix than in less than 30 minutes.

Was du brauchst

Schritt 1 Guitar String Replacement

Baby Taylor Guitar String Replacement, Guitar String Replacement: Schritt 1, Bild 1 von 3

Baby Taylor Guitar String Replacement, Guitar String Replacement: Schritt 1, Bild 2 von 3

Baby Taylor Guitar String Replacement, Guitar String Replacement: Schritt 1, Bild 3 von 3

Rotate the tuner of the string you want to replace in a clockwise direction until it's loose.
You can either do it by hand (First Picture) or you can use the guitar string winder (Second picture).

Bearbeiten

Schritt 2

Grab a plier and pull out the bridge pin of the string you want to replace.
Make sure that you've completed step 1 first. The string has to be loose before doing this step.

Bearbeiten

Schritt 3

Baby Taylor Guitar String Replacement: Schritt 3, Bild 3 von 3

Take out the string from the bridge and the tuning pin.
You can now throw away the string. You will not be needing it anymore.

Bearbeiten

Schritt 4

Grab the new string and place the end (ball-end) inside the bridge.
The ball-end of a string is the side of the string that has a ball shape. (Shown in picture 2)

Bearbeiten

Schritt 5

Place the bridge pin inside the bridge in order to lock in the new string.
Lightly hammer down the bridge pin to keep it from detaching.

Bearbeiten

Schritt 6

Cut the excess string with a plier.
Cut the string around 1.5 inches over the desired tuning pin. (Recommended by Taylor Guitars)

Bearbeiten

Schritt 7

Place the new string inside the tuning pinhole.
It is recommended to place a really small portion of the string inside the pinhole to keep it from ripping your guitar bag. (As shown in the picture)

Bearbeiten

Schritt 8

Baby Taylor Guitar String Replacement: Schritt 8, Bild 3 von 3

Rotate the tuners in a counter-clockwise direction to tighten the new string.
You can either tighten it by hand (First Picture) or you can use the guitar string winder (Second Picture).

Bearbeiten

Schritt 9

Make sure your string is in tune and strum away!

Bearbeiten

Abschluss

Most guitar strings de-tune after they’ve been recently replaced. Tune your strings every once in a while for a few days and the strings will stay in tune.