Zum Hauptinhalt wechseln

Brother XR-40 Presserfoot Replacement

  1. Brother XR-40 Presserfoot Replacement, Presserfoot: Schritt 1, Bild 1 von 1
    • Make sure the presser foot is in the up position.

    • The switch should be up, not in the vertical position.

  2. Brother XR-40 Presserfoot Replacement: Schritt 2, Bild 1 von 1
    • Adjust the needle to the top of its stroke using the hand wheel.

  3. Brother XR-40 Presserfoot Replacement: Schritt 3, Bild 1 von 2 Brother XR-40 Presserfoot Replacement: Schritt 3, Bild 2 von 2
    • Lift the arm on the back of the presser foot assembly to release the foot.

  4. Brother XR-40 Presserfoot Replacement: Schritt 4, Bild 1 von 1
    • Remove the presser foot.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Kevin Bickers

Mitglied seit: 02/05/14

673 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 2-12, Amido Winter 2014 Mitglied von Cal Poly, Team 2-12, Amido Winter 2014

CPSU-AMIDO-W14S2G12

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 5

Insgesamt: 1,315