Canon EOS Rebel T1i Rubber Grip Replacement
Einleitung
Zu Schritt 1 der AnleitungIf the rubber grip on the camera is dirty or has fallen off, follow these instructions to remove the grip.
Was du brauchst
-
-
Use a plastic prying tool to slowly pry the rubber grip from the top right corner, and slowly work the tool down the rubber grip.
-
Gently remove the rubber grip by pulling the adhesive side up and away from the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
Cal Poly, Team 3-41, Maness Spring 2014 Mitglied von Cal Poly, Team 3-41, Maness Spring 2014
CPSU-MANESS-S14S3G41
4 Mitglieder
10 Anleitungen geschrieben
