Canon PowerShot A540 LCD Screen Replacement
Einleitung
Zu Schritt 1 der AnleitungIf your LCD screen is cracked, broken, unresponsive, or otherwise damaged, you may need to replace it. After removing the back cover, you will have access to the LCD screen to replace it.
Was du brauchst
-
-
Turn off the camera.
-
Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.
-
-
-
Turn the camera upside down to view the "Card/Batt. Open" Cover.
-
Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.
-
-
-
Open "Card/Batt. Open" Cover.
-
Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.
-
-
-
Turn the camera to the right side of the LCD screen.
-
Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.
-
-
-
-
Gently remove the back cover.
-
Start at the bottom at the corner of the "Card/Batt. Open" Cover.
-
Then move onto the other edges and the top.
-
-
-
Turn the camera to view the back.
-
Remove the one (1) 3.0 mm screw on the top right corner of the screen.
-
-
In diesem Schritt verwendetes Werkzeug:Tweezers$4.99
-
Lift the LCD Screen off of the back to view the attached ribbon cables.
-
Use tweezers to flip the black bar up.
-
-
-
Use tweezers at the top left of the LCD Screen to wedge the top left of the Outer Frame loose.
-
Use the tweezers at the top right of the LCD Screen to wedge the top right of the Outer Frame loose.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Personen haben diese Anleitung absolviert.
Team
Baylor, Team 7-12, Williams Spring 2015 Mitglied von Baylor, Team 7-12, Williams Spring 2015
BU-WILLIAMS-S15S7G12
3 Mitglieder
20 Anleitungen geschrieben
