Einleitung

This guide requires a Phillips #00 screwdriver

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Unplug the laptop from the power adapter and turn the power off. Failure to unplug laptop before proceeding could result in risk of electric shock! Failure to unplug laptop before proceeding could result in risk of electric shock!
    • Unplug the laptop from the power adapter and turn the power off.

    • Failure to unplug laptop before proceeding could result in risk of electric shock!

  2. Slide the battery-lock tab and hold. Flip the battery away from the chassis to remove it. Flip the battery away from the chassis to remove it.
    • Slide the battery-lock tab and hold.

    • Flip the battery away from the chassis to remove it.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Undo the two screws on the fan cover labeled "F2" These screws will remain in the panel
    • Undo the two screws on the fan cover labeled "F2"

    • These screws will remain in the panel

    • Remove cover plate.

  5. Remove the single 6mm screw holding the fan in place.
    • Remove the single 6mm screw holding the fan in place.

  6. Flip the handle up. Use the handle to pull the fan away directly up, away from case.
    • Flip the handle up.

    • Use the handle to pull the fan away directly up, away from case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

charlierefvem

Mitglied seit: 11.01.2011

854 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 13-2, Forte Winter 2011 Mitglied von Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Mitglieder

8 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 2,091