Einleitung

In this guide, we will be showing you how to remove and replace the Display Assembly.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn the computer over and remove the two screws.

  2. Disconnect the Mini-Card antenna cables from the Mini-Card.
    • Disconnect the Mini-Card antenna cables from the Mini-Card.

  3. Disconnect the display cable from the connector on the system board and remove it from the routing guide.
    • Disconnect the display cable from the connector on the system board and remove it from the routing guide.

  4. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. Remove the four screws (two on each side) that secure the display assembly to the computer base.
    • Remove the four screws (two on each side) that secure the display assembly to the computer base.

  6. Lift and remove the display assembly out of the computer base.
    • Lift and remove the display assembly out of the computer base.

  7. Place the NEW display assembly in position and replace the four screws (two on each side) that secure the display assembly to the computer base.
    • Place the NEW display assembly in position and replace the four screws (two on each side) that secure the display assembly to the computer base.

  8. Route the display cable into the routing guide and connect the cable to the connector on the system board.
    • Route the display cable into the routing guide and connect the cable to the connector on the system board.

  9. Connect the Mini-Card antenna cables to the connectors on the Mini- Card.
    • Connect the Mini-Card antenna cables to the connectors on the Mini- Card.

  10. Turn the computer over and replace the two screws at the bottom of the computer.
    • Turn the computer over and replace the two screws at the bottom of the computer.

Ziellinie

Terrence15

Mitglied seit: 18.12.2017

70.653 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 3

Insgesamt: 27