Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

This guide will show how to replace a bad fuse, which will cause the device not to turn on.

Before any repair work can be done, one must remove the device from the vehicle. To do so follow this link to see a vehicle general removal of a stereo system.

  1. Locate the clip on the wiring harness.
    • Locate the clip on the wiring harness.

  2. Press down on the clip like you would an Ethernet cable. Rock harness side to side, pulling gently towards you until harness detaches.
    • Press down on the clip like you would an Ethernet cable.

    • Rock harness side to side, pulling gently towards you until harness detaches.

  3. Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen

    Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen
  4. Once you have removed the wiring harness.
    • Once you have removed the wiring harness.

    • Locate the fuse.

  5. Using your index finger and thumb on either side of the fuse.
    • Using your index finger and thumb on either side of the fuse.

  6. Rock back and forth gently pulling towards yourself until the fuse is removed.
    • Rock back and forth gently pulling towards yourself until the fuse is removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Odelkys Marquez

Mitglied seit: 22.09.2014

1.022 Reputation

7 Anleitungen geschrieben

Team

USF Tampa, Team 10-2, Brown Fall 2014 Mitglied von USF Tampa, Team 10-2, Brown Fall 2014

USFT-BROWN-F14S10G2

3 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 2

Letzten 7 Tage: 18

Letzten 30 Tage: 79

Insgesamt: 5,888