TomTom GO Live 1535M Battery Replacement
Einleitung
Zu Schritt 1 der AnleitungIf your TomTom Go Live does not seem to be charging or hold said charge, then the battery needs to be replaced. This guide will show how to take this device apart and replace the battery without damaging the screen or cables.
Was du brauchst
-
-
Slip a small opening tool underneath the screen, gently sliding it around the outside edge.
-
-
-
Carefully remove the reset button cable (located on the left) and the ribbon cable.
-
Remove the screen and set it aside.
-
-
-
In diesem Schritt verwendetes Werkzeug:Tweezers$4.99
-
Remove the logic board cables.
-
-
-
Remove the 3.6mm screws with a Phillips Screwdriver.
-
After removing the screws simply lift the logic board from the base.
-
-
-
Simply lift the battery up and out of the base.
-
Remove the cable.
-
Replace the battery.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Personen haben diese Anleitung absolviert.
Team
USF Tampa, Team 19-4, Blackwell Spring 2014 Mitglied von USF Tampa, Team 19-4, Blackwell Spring 2014
USFT-BLACKWELL-S14S19G4
1 Mitglied
5 Anleitungen geschrieben
