The steam chamber contained two parts. The first part Mist Nozzle was screwed into the Mist Chimney with 2 screws (M3 x 0.5mm Phillips Head Screw) (*now missing)and the Mist Chimney onto the chamber with an additional 4 of the same screws. These connected parts directs the steam evenly up and through the sides of the steam chamber.

Mist Nozzle Length: 79mm

Mist Nozzle Height: 85mm

Screw head diameter: 5mm

Screw shaft length: 10mm

Mist Chimney Length: 125mm

Mist Chimney Height: 100mm

Mist Chimney Width: 50mm