Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die diese beinhaltet.
Schritt 1 übersetzen
Schritt 1
-
Remove these two cables from the main PCB board using a plastic spudger tool.
-
Remove the third cable using a pair of blunt tweezers.
-
Place the end of the tweezers in the small notch in the cable connector and push the connector out.
-
Using a pair of blunt tweezers, carefully pull out the red and yellow cables from the DC PCB board.
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.