Änderungen an diesem Schritt
Bearbeitet von Kelly Johnston –
Bearbeitung genehmigt von Kelly Johnston
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Unscrew the 12 |
|---|---|
| + | [* black] Unscrew the 12 Phillips #0 screws from the back cover of the device. |
| [* black] Using the spudger, gently pry the back cover off of the device. There are several plastic snaps located on the inside of the cover - run the spudger around the perimeter of the cover to open each snap. | |
| [* black] Once the back cover is fully disconnected from the device, lift the cover off and set aside. |