Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Blake Klein

Bearbeitung genehmigt von Blake Klein

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Open the laptop.
-[* black] Push the computer screen as far back on its hinges as it allows.
-[* black] Turn it around and make sure the screen is closest to you.
-[* red] Place a metal spudger between the Bezel and the Back Cover Lid.
-[* black] Twist the spudger until you hear a clicking sound and continue doing this for the entire display.
-[* black] Remove the Bezel.
-[* icon_caution] Be forceful, but not too much.
+[* black] Open up the laptop and flatten it down on a workable surface.
+[* black] Turn it around so that the screen is closest to you.
+[* red] Insert the flat end of a spudger, or plastic opening tool, into the groove between the screen bezel and top case.
+[* black] Twist the spudger, or plastic opening tool, until you hear a clicking sound and continue doing this around the entirety of the display.
+[* black] Remove the bezel.