Änderungen an Schritt Nr. 1
Bearbeitet von Teena Carnegie –
Bearbeitung genehmigt von Teena Carnegie
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
[* icon_caution] Do not pull the keyboard away from the laptop. The keyboard is connected to the motherboard by a cable. Pulling the keyboard may cause damage to the keyboard and/or motherboard. | |
+ | [* icon_caution] Metal spudgers and similar prying tools can damage internal components like the motherboard. It is ideal to use a regular black nylon spudger or a plastic opening tool, but for this device the metal jimmy was the only tool to work. |
[* red] Flip over and open your device. Gently wedge the metal Jimmy into the rightmost hole at a 45-degree angle. Make sure that the Jimmy is between the silver metal portion of the keyboard and the silver plastic edge around the keyboard. | |
[* black] Tilt the metal jimmy away from you to pry up the edge of the keyboard. | |
[* black] Repeat the previous actions on each of the other three holes to release the keyboard. | |
- | [* icon_caution] Metal spudgers and similar prying tools can harm internal components like the motherboard. It is ideal to use a regular black nylon spudger or a plastic opening tool, but for this device the metal jimmy was the only tool to work. |