Änderungen an Schritt Nr. 1
Bearbeitet von Roberto Bartolacci –
Bearbeitung genehmigt von Roberto Bartolacci
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [title] Remove the hard disk | |
| [* black] [guide|78998|Are you grounded?] If yes, using a spudger, flip up the small black locking flap of the hard disk's ZIF connector. | |
| - | [* yellow] Afterwards, using a pair of tweezers, grab the HDD's SATA cable at the transparent tab and simply lift its end up, out of the connector |
| - | [* light_blue] By levering with an opening tool, pry the HDD out of its bay. Once it is on your hand, release its cable from its retaining hole on the base enclosure and finally |
| + | [* yellow] Afterwards, using a pair of tweezers, grab the HDD's SATA cable at the transparent tab and simply lift its end up, out of the connector. ''You won't meet any resistance.'' |
| + | [* light_blue] By levering with an opening tool, pry the HDD out of its bay. Once it is on your hand, release its cable from its retaining hole obtained on the base enclosure and finally leave the HDD aside. |