Änderungen an Schritt Nr. 20
Bearbeitet von Lauren Nortier –
Bearbeitung genehmigt von Lauren Nortier
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Lift the display cable up and fold it out of the way. | |
| [* black] If part of the cable is stuck to the display panel, slowly pull up on it to release the adhesive. | |
| [* icon_caution] Be careful not to dislodge the circuit board next to the display panel while moving the display cable. | |
| + | [* icon_reminder] During reassembly, be sure to place the circuit board on the 2 black pins on the edge of the display before reconnecting the wire if it was dislodged. |