Änderungen an Schritt Nr. 1
Bearbeitet von Justin Ogihara –
Bearbeitung genehmigt von Justin Ogihara
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Remove the screws and move wires. |
|---|---|
| - | [* red] Use the 00 Phillips screwdriver to remove the 2, 5.5mm screws that secure the fan. |
| - | [* black] Unplug the wire that is connected to the fan. |
| - | [* black] Move the wires so they are out of the way of the fan. |
| - | [* icon_note] Take the tape off of the fan that is holding the wires in place against the fan. |
| + | [* red] Use the Phillips #00 screwdriver to remove the two 5.5mm screws that secure the fan. |
| + | [* black] Unplug the wire that is connected to the fan and move the wires so they are out of the way of the fan. |
| + | [* black] Remove the tape off of the fan that is holding the wires in place against the fan. |