Änderungen an diesem Schritt
Bearbeitet von Toria Keyes –
Bearbeitung genehmigt von Toria Keyes
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Use plastic pry tool or fingers to separate the second back covering from the rest of the device staring at the top corner. Next, wedge the plastic pry tool between the second covering and the remainder of the device and start sliding back and forth until that portion is separated. |
|---|---|
| - | [* black] Once the top corner is separated, slide the plastic pry tool around the edge of the plastic covering until it is loose enough to fully remove by hand. |
| + | [* black] Use plastic pry tool or fingers to separate the second back covering from the rest of the device staring at the top corner. |
| + | [* black] Wedge the plastic pry tool between the second covering and the remainder of the device |
| + | [* black] Start sliding back and forth until that portion is separated. |
| + | [* black] Slide the plastic pry tool around the edge of the plastic covering until it is loose enough to fully remove by hand. |