Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Austin Blakely

Bearbeitung genehmigt von Austin Blakely

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_caution] Make sure the RAM stick lines up correctly with the spacing in the slot. As you can see, it is important you position the RAM facing the right way, otherwise it will not fit correctly and you may damage your new stick(s) of RAM.
-[* orange] Take the RAM out of the package, make sure you are not holding it by the edge so as not to damage it. Hold it from the sides, like so.
-[* green] The RAM slots can be found here. They are highlighted in a light blue – dark blue pattern, and you will already likely see one or two sticks already installed in the slot(s) so you won’t miss it.
+[* orange] Take the RAM out of the package, handling only the edges so as not to damage it. Be sure not to touch any of the gold pins on the bottom edge as well.
+[* green] The RAM slots can be found beside the fan. They are highlighted in a light blue – dark blue pattern, and you will already likely see one or two sticks already installed in the slot(s) so you won’t miss it.